nRF9151-DK DECT NR+ external antenna

RE: nRF9151-DK DECT NR+ external antenna

Øyvind — Tue, 04 Nov 2025 12:34:02 GMT

Hello!

[quote user="RinkV"]Would it be possible to share the 3D files for that mounting solution? [/quote]

Yes, here are the .stl files for the box

devzone.nordicsemi.com/.../nRF9151DK_2D00_FT_2D00_Box.zip

Kind regards,
Øyvind

RE: nRF9151-DK DECT NR+ external antenna

RinkV — Tue, 04 Nov 2025 09:36:35 GMT

Thank you for your response! Would it be possible to share the 3D files for that mounting solution?

RE: nRF9151-DK DECT NR+ external antenna

Øyvind — Mon, 03 Nov 2025 08:39:17 GMT

Hi Rink,

[quote user="RinkV"] Is there a suggested method of connecting the W5095K to the swf connector?[/quote]

The solution that is used internally is something similar to this

This will secure the antenna connector in place on the DK while connecting the antenna itself to an SMA connector.

Kind regards,

Øyvind

RE: nRF9151-DK DECT NR+ external antenna

RinkV — Thu, 30 Oct 2025 19:24:07 GMT

Hello, in your message you state that you used a W5095K via a "separate cable". The connector on the nRF9151 for dect nr+/lte is an swf connector from Murata, I believe. I am concerned with the stability of this connector when a W5095K antenna is attached. From my understanding this connector is mainly meant for connecting testing equipment. Is there a suggested method of connecting the W5095K to the swf connector? Thanks in advance for your response!

Kind regards,

Rink

RE: nRF9151-DK DECT NR+ external antenna

Øyvind — Thu, 23 Oct 2025 06:29:26 GMT

Hello, I'm happy that I could help you get a clearer picture. Let us know if there is anything else that is unclear.

Kind regards,
Øyvind

RE: nRF9151-DK DECT NR+ external antenna

Mich@l — Wed, 22 Oct 2025 11:28:35 GMT

Hello!
Thank you for sharing such valuable and original information - it really helps me get clearer picture of what I need.

Best regards,
Michal

RE: nRF9151-DK DECT NR+ external antenna

Øyvind — Tue, 21 Oct 2025 11:19:07 GMT

Hello, here is the answers I got from our experts

[quote user=""]Are there any recommended external antennas that I would be able to use with this kit?[/quote]

At this time, we do not provide an official recommendation for external antennas for the nRF9151 DK. We have conducted Band 1 range testing with the Pulse Electronics W5095K antenna connected via a separate cable. While the W5095K offers higher RX/TX gain than the onboard antenna, the additional connectors introduce insertion loss that can reduce the net performance benefit. Various external antennas have been used in past range evaluations, but we do not have a definitive record of the specific models.

[quote user=""]Are there any other parameters apart from those listed here (DECT NR+) that needs to be complied with?[/quote]

Regulatory requirements vary by target market and, in some cases, by frequency band within the same region (for example, U.S. Band 9 versus Band 4). In the EU, Band 1 operation is governed by ETSI EN 301 406-2. In the United States, the nRF9151 supports Bands 9 and 4, which are regulated under different FCC rules—47 CFR Part 15 Subpart D (Band 9) and 47 CFR Part 15 Subpart C (Band 4). These regulations also specify antenna-related constraints, including limits on gain and maximum radiated power, which must be met by the final product.

[quote user=""]Lastly, is using the external (possibly directional) antenna even beneficial?[/quote]

In our testing, the nRF9161 DK’s integrated antenna achieved an approximate range of 500 m, while the Pulse Electronics W5095K external antenna reached about 1.3 km under similar conditions. High‑gain directional antennas, such as large Yagi designs, can extend range significantly; for example, in a Band 4 line‑of‑sight test using an internal evaluation board with a Yagi antenna, we measured up to 9.4 km. However, these antennas are not practical for all deployments due to their size, and regulatory limits on antenna gain and maximum radiated power may apply. We do not have a comprehensive, standardized comparison of internal versus external antennas across all DK configurations, but for point‑to‑point use cases, a high‑gain directional antenna can be beneficial.

Kind regards,
Øyvind

RE: nRF9151-DK DECT NR+ external antenna

Mich@l — Fri, 17 Oct 2025 12:37:26 GMT

Hi!
Thank you so much. I am looking forward to hearing from you soon.

RE: nRF9151-DK DECT NR+ external antenna

Øyvind — Fri, 17 Oct 2025 12:01:52 GMT

Hi Michal, apologies for the late reply on this ticket.

The question was forwarded to our DECT NR+ experts but unfortunately they have been overloaded the last weeks. I just poked them for an answer and hope to have an answer by Monday.

Sorry for the inconvenience.

Kind regards,
Øyvind