Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

dejans — Wed, 19 Nov 2025 08:18:15 GMT

Hi,

You can try to use west or nrfutil for flashing your board. Please have a look at west flash and using command line for flashing.

Best regards,
Dejan

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

alwalker — Tue, 18 Nov 2025 03:23:52 GMT

I am running VS Code as follows:

Version: 1.106.0 (user setup)
Commit: ac4cbdf48759c7d8c3eb91ffe6bb04316e263c57
Date: 2025-11-11T16:02:25.943Z
Electron: 37.7.0
ElectronBuildId: 12597478
Chromium: 138.0.7204.251
Node.js: 22.20.0
V8: 13.8.258.32-electron.0
OS: Windows_NT x64 10.0.26100

nRF Connect for VS Code

Version 2025.8.654

The missing Flsh option happened with this project only.

What is the syntax of the flash command that I should use from the terminal please?

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

dejans — Mon, 17 Nov 2025 12:51:58 GMT

Hi Al,

[quote user="alwalker"]Once I have successfully built a project, I would normally expect to see Flash as one of the available options. Why don’t I see it please?[/quote]

Is this missing Flash option something that has happened recently?
Have you done anything of the following recently: updated VS Code, updated VS Code extension, or installed new VS Code extension (other than nRF Connect for VS Code)?
Which versions of VS Code and nRF Connect for VS Code extension do you use?

[quote user="dejans"]You can try to open Terminal window and flash from the terminal.[/quote]

Have you tried flashing from the terminal? What is the result?

Best regards,
Dejan

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

alwalker — Fri, 14 Nov 2025 13:21:30 GMT

Hi Dejan,

I did not flash the board as no option to do so under either the Actions of Connected Board section is presented, this is the point I am querying. Once I have successfully built a project, I would normally expect to see Flash as one of the available options. Why don’t I see it please?

Kind regards,

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

dejans — Fri, 14 Nov 2025 13:00:25 GMT

Hi,

[quote user=""]I have programmed an nRF5340 DK with the Auracast Broadcast Audio Source application.[/quote][quote user="alwalker"]But I am not then presented with a Flash option for the connected nRF5340 DK board[/quote]

It is not clear to me if you managed to flash the sample or not? Can you clarify this?

You can try to open Terminal window and flash from the terminal.

Best regards,
Dejan

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

alwalker — Fri, 14 Nov 2025 02:57:53 GMT

Hi Dejan,

Just to be sure, I created a new sample application using the v3.1.1 SDK and toolchain.

The sample application is bap_broadcast_source

This is the build configuration:

The build completes successfully:

devzone.nordicsemi.com/.../251114-Terminal-Log.txt

But I am not then presented with a Flash option for the connected nRF5340 DK board:

What am I missing please?

Kind regards,

RE: Broadcast Audio Source application not recognised by Samsung Galaxy Tab S11 and Buds3 Pro

dejans — Thu, 13 Nov 2025 14:33:22 GMT

Hi,

Can you show the link to the sample?
Can you please provide information about NCS version that you use?
Can you show build command that you used to build the sample application?

Best regards,
Dejan