current measurement on nrf52 DK

RE: current measurement on nrf52 DK

oliverhu — Thu, 17 Mar 2016 08:19:37 GMT

hi stian, I use pc10040 v0.9.0 nrf52 DK，and SDK i used is nrf5 11.0.0 and nrf52_2.0.0-8 alpha.

RE: current measurement on nrf52 DK

Stian Røed Hafskjold — Wed, 16 Mar 2016 15:20:30 GMT

So which version of the kit do you use? Which SDK version? And which Softdevice version? Do you still get the same numbers with an ampere-meter?

RE: current measurement on nrf52 DK

oliverhu — Wed, 16 Mar 2016 15:06:11 GMT

hi stian, thank you very much. i am using the own code for this case which include spi transmission and BLE. actually i have tried the /pwr_profiling application , but the result is still high , you can see my thread herelink text

RE: current measurement on nrf52 DK

Stian Røed Hafskjold — Wed, 16 Mar 2016 13:35:27 GMT

It looks like something is wrong with your oscilloscope setup. Ground on both probes are connected to the same as the kit right? No USB cable connected to the kit? Do you have a high resolution mode under that "Acq mode" button there? Use that.

I would recommend checking with a regular ampere-meter first to see if you actually have 6.5 mA DC current.

If you still see high DC current:
Are you using your own application code? Try with the ble_peripheral/pwr_profiling application instead.

This is noise from somewhere and shouldn't be there. You are measuring over P22 right, and have prepared the kit like described in this tutorial? devzone.nordicsemi.com/.../

Which version of the kit do you have?