nrf9151 NTN Sockets

RE: nrf9151 NTN Sockets

Simon D-M — Mon, 05 Jan 2026 13:39:16 GMT

Hi,

Please, if you want to continue this conversation be sure to do it here, which I believe has been created to address this issue.

It is better to have only one subject in a thread, it is easier to follow and is also more relevant for people that are searching for an issue.

Thanks,

Simon D-M

RE: nrf9151 NTN Sockets

SimonLou — Sun, 04 Jan 2026 16:37:01 GMT

No problem,

I just share what happened, I have decide Murata , Quotel, and Iridium, they are more ready.

RE: nrf9151 NTN Sockets

Achim Kraus — Sun, 04 Jan 2026 16:31:29 GMT

> and check at command v0.7 and 1.04

Sorry, you still write only some bits, but the more complete info in order to see, what happens on your side, is missing ...

I'm just an other user, I'm not really able to spend the time to ask again and again for more precise information. With that, I cross the fingers for you, that the "other brand development kit" works for you.

RE: nrf9151 NTN Sockets

SimonLou — Sun, 04 Jan 2026 16:22:45 GMT

Hi Achim

What I see was

1. When I first power up the board(2.0.3 by default), there are two LEDs light up, one is power LED ,one is LED1. And I can run AT command from rfn connect tool serial command, to check modem version, etc

2. After I did alpha.zip by "write", the LED1 went off,and not able to execute at command anymore

3. After redo v2.0.3 by quict start,

4. and check at command v0.7 and 1.04

the 0.7 AT%XSYSTEMMODE=0,0,0,0,1 : 5 parameters

The 1.04 AT%XSYSTEMMODE=0,0,0,1 : only 4, if I put 5 , it will get error

This is what I get in past a few days

FYI, I have NTN sim card activated as well.

RE: nrf9151 NTN Sockets

Achim Kraus — Sun, 04 Jan 2026 08:59:24 GMT

> 1. After I program 2.0.2 with zip(after unzip full download from Nordic,

Just to give you some hints:

"unzip full download"

Nobody will fully understand, what you did. There are so many "downloads" around the nRF91, that even the "full" in the context of the modem firmware doesn't clear that up.

If you want to use the nRF9151 A1 for NTN (and TN), you need

mfw_nrf9151-ntn_1.0.0-1.alpha.zip

and if you want to rollback to TN (only), you need

mfw_nrf91x1_2.0.4.zip

Now: never ever unzip these mfw downloads! Apply them with:

nrfjprog --verify -r --program mfw_nrf9151-ntn_1.0.0-1.alpha.zip

nrfjprog --verify -r --program mfw_nrf91x1_2.0.4.zip

I don't know, how often I did that in the last months (for sure more than 10x, and with several DKs), it was always successful. And never unzipped by me.

Using the "Programmer App" of the "nRF Connect for PC" works similar:

- Select your DK with "Select Device".

- Add either the "mfw_nrf9151-ntn_1.0.0-1.alpha.zip" or the "mfw_nrf91x1_2.0.4.zip" with "Add file"

The the "Programmer App" will show you the resulting functions, "erase & write" is disabled, "Write" is enabled, so select that. A new dialog "Modem DFU" is shows up, confirm "write" and then wait, it takes a minute or two.

Also that was always successful, even if I use the "Programmer App" only in rare cases.

RE: nrf9151 NTN Sockets

SimonLou — Fri, 02 Jan 2026 23:54:10 GMT

HI Simon-DM

I decide to give up for now

I will switch to other brand development kit

Simon

RE: nrf9151 NTN Sockets

SimonLou — Fri, 02 Jan 2026 15:36:23 GMT

Hi yayalew

How do you pragram the "alpha" modem firmware to the board?

I have download the alpha zip ut there is no saying how to apply.

I unzip the alpha file , but do not see aany hex is good for "Write" or "Erase and Write"

If you can kindly provive the donload link and steps to apply

Simon

RE: nrf9151 NTN Sockets

SimonLou — Thu, 01 Jan 2026 16:49:41 GMT

Hi Simon D-M,

I have follow monogoto website, but I think there are a few steps I have got confused

1. After I program 2.0.2 with zip(after unzip full download from Nordic,there is an zip I will call that A.zip2. I unzip the full dowanload and use A.zip for "Write" to flash SMA

2. Look for hex(I was using subdir hex file) to do "Erase and Write", where the bootloader partion disapear(shuold I pick the img subdir hex instaed), apear the booloader portion disapear

3. Then the board does not activate for AT command

So are you able to provide me the steps include where should I use the hex and zip file from my download zip 2.0.2 and the alpha zip

Below is 2.0.2 release note ,

1. Should I use hex from"img_app_bl" for Erase and Write?

These files were built with nRF Connect SDK version v3.1.0
from sdk-nrf repository (github.com/.../sdk-nrf)

Full commit SHA: 6c6e5b32496eb7203f4c52ae9b3575949eab522e

Folder contents:
img_app_bl/
  - Full application images including bootloader.
  - These files can be used with:
    - nRF Connect Programmer.
    - nRF Util CLI.
 img_dfu_zip/
  - These images contain only application and bootloader is not included.
  - Images are in binary format.
  - These files can be used with:
    - Over-the-air update, for example, through nRF Cloud, Azure or AWS.
img_fota_dfu_hex/
  - These images contain only application and bootloader is not included.
  - Images are in HEX format.
  - These files can be used with nRF Connect Programmer (through USB bootloader only).
img_fota_dfu_bin/
  - These images contain only application and bootloader is not included.
  - Images are in binary format.
  - These files can be used with:
    - Over-the-air update, for example, through nRF Cloud, Azure or AWS.
    - nRF Util CLI (through USB bootloader only)

The following folders contain images configured for modem debugging:
  - img_app_bl/debug
  - img_fota_dfu_hex/debug
  - img_fota_dfu_bin/debug

And 2.0.2 does not include NTN band

*** mfw_nrf91x1_2.0.2
*********************

The mfw_nrf91x1 is Cellular IoT and Positioning firmware for modem subsystem of nRF9131 LACA A0,
nRF9151 LACA A0, and nRF9161 LACA A0 SiP modules. It supports 3GPP LTE release 14 LTE-M and NB-IoT
standards, selected optional 3GPP LTE release 14 and 15 features, GPS L1C/A and QZSS L1C/A
positioning.

LTE-M operation is enabled on E-UTRA bands 1, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 25, 26, 28, 66
and 85.

NB-IoT operation is enabled on E-UTRA bands 1, 2, 3, 4, 5, 8, 12, 13, 17, 19, 20, 25, 26, 28, 65, 66
and 85.

.............................Jan 1st 2026 ....................

Hi Simon-D-M

Finally I can complete 2.0.2 modem an Aplication to programm to the kit

Modem versiom is 2.0.2, but some how not all commands work.

My steps are

1. Download 2.0.2

2. Unzip it,

3. Open Programmer

4. Look unzip folder first seen zip file, and "Write"

5. And then goto xx_bl folder, look for servic,.xxx.hex,this file include bootloader

6. Add it and "Eraseand write",

7.I can send at command, but mfm still 2.0.2

My question is how can I make it 1.0.0.1 alpha, the zip file I dowanload does not contain hex works for fullfucion, or there is steps I am missing here

RE: nrf9151 NTN Sockets

SimonLou — Tue, 30 Dec 2025 22:22:33 GMT

Hi,

Thanks for the input, I have try those, but I have no luck to make it work,

1. I did Quick start, somehow it always roll back to 2.0.3 by default.

2. I follow the steps on motogoto, after I "erase and write" the right part of partition "orange" part disappear, and LED1 on board one goes off, and nothing work, till I do the "quick start" to go back to 2.0.3 so that I can run AT command

RE: nrf9151 NTN Sockets

SimonLou — Tue, 30 Dec 2025 16:24:37 GMT

I have got quick start work again, but some how I am not sure if I have update to 1.0.0.1-alpha,

I have follow the link

https://docs.nordicsemi.com/bundle/ncs-3.0.2/page/nrf/app_dev/device_guides/nrf91/nrf91_dk_updating_fw_programmer.html

it looks update successfully, but when I do the AT command test, it look most of them are fail

RE: nrf9151 NTN Sockets

yayalew — Tue, 30 Dec 2025 14:52:09 GMT

I used the programmer on nrfConnect, seemed to work for me

RE: nrf9151 NTN Sockets

Simon D-M — Tue, 30 Dec 2025 10:36:35 GMT

Hi Yeab,

I'm sorry we don't have a NTN expert on hand right now due to Christmas / New Year holidays. You might have to wait until next week if you want an expert on the subject.

However, I'll still try to help you 🙂.

Did you connect your device to a NTN network (i.e. Skylo) before sending the AT-commands you shared ?

I see that when you are trying to send the reception command, you write : "AT#XRECV=<x>" but if I check the SLM AT-Commands documentation I see that it should be : "AT#XRECV=<handle>,<mode>,<flags>,<timeout>[,<data_len>]". I think you might be missing some parameters.

I saw that there is a branch on the Asset tracker template application repository that supports NTN. Maybe you can try to take a look into it to see in more details how they did it.

I also found a small tutorial from monogoto on how to use NTN with their SIM card. It seems like they are using the latest NTN modem firmware, but not the latest SLM application. Even tho, I think that it can still be helpful to go through it.

Tell me if any of my suggestions helped !

Best regards,

Simon D-M

RE: nrf9151 NTN Sockets

SimonLou — Mon, 29 Dec 2025 23:44:34 GMT

Lucky you,

I just post my issue which is the 1.0.0.1-alpha just somehow kill my programming app,and othe features.

By the way how did you update the firmware?