RE: nRF9151 no communication using pti fw

Øyvind — Wed, 25 Mar 2026 11:46:04 GMT

Hello,

If you are targeting DECT NR+ applications, please see our DECT NR+ product page. The official DECT NR+ firmware binaries can be accessed by contacting Nordic Sales

[quote user=""]Do you know how we can configure the transceiver to use Wirepas modulations to carry out RF testing?.[/quote]

Are you targeting a DECT NR+ mesh application using Wirepas? The Production Test Image facilitates calibration, testing, and configuration features for production purposes.

DECT NR+ operation is enabled on bands 1, 2, 4, 9, and 22. Band 4 is supported by nRF9151 LACA A0 and A1.

This release aligns with v1.5 of the nRF91x1 Production Test AT Commands Reference Guide.

[quote user=""]However, once the fw is flashed the evk doesn’t respond to the AT commands.[/quote]

What application did you flash your device with? AT client sample should be best fit in this situation. Please note that we have samples to test with, but these need e.g. DECT NR+ FW 2.0.0.

[quote user=""]However, once the fw is flashed the evk doesn’t respond to the AT commands. I have found a similar issue in the Nordic’s forum, you can see the info in this link:[/quote]

The issue in this case was that the customer was using the wrong application that did not support PTI.

Kind regards,
Øyvind