RE: How to Register a Device on nRF Cloud

Samruddhi Jadhav — Wed, 12 Aug 2026 14:24:41 GMT

Hello,

Just an update on your first question from our team. For nRF54L, you can take a look at the following guide. The nRF54L device doesn't have to be pre-registered:
Nordic Bluetooth Quickstart (nRF52/nRF53/nRF54 Series) | Memfault Docs

An alternative is to flash a pre-built image:
Release v1.0.1 · nrfconnect/quickstart-bluetooth · GitHub

The project key can be configured before running the mobile app. See the following:
GitHub - nrfconnect/quickstart-bluetooth: nRF Cloud Bluetooth Quick Start Sample · GitHub

You can also take a look at:
nRF Toolbox - nordicsemi.com
nRF Toolbox is the mobile app which can be used to upload telemetry data to nRF Cloud.

Please let us know if you have any further questions.

Best Regards,

Samruddhi

RE: How to Register a Device on nRF Cloud

Samruddhi Jadhav — Wed, 12 Aug 2026 14:07:14 GMT

Hello Riki Yoshida,

[quote user=""]

Is the procedure shown in the screenshot below correct?

[/quote]

For the nRF54L-dk, I think the CSV method you have mentioned is correct. I will confirm about this internally with our cloud team and see if there is a documentation for this process.

[quote user=""]

→I entered “AT%ATTESTTOKEN” in the nRF Connect for Desktop serial terminal. However, I received an error message stating that “command not found”.

[/quote]

Can you please confirm whether your device was programmed with the modem_shell sample? Have you tried running: at AT%ATTESTTOKEN
You have to make sure to have a firmware which has AT commands enabled. So, when you send "AT", the modem should respond with "OK".
If this is not the case, then you might not have the AT commands enabled on the serial port. You have to then flash for example the "Serial Modem application" or a different application supporting it.

[quote user=""]

2,Also, what is “Shape Mate,” which is mentioned in the nRFCloud documentation?

[/quote]

If this image was given in the documentation, then I think it might be a name given to an example project they have used in the documentation. But just to confirm, which documentation was this given in?

Please let us know if you have any further questions.

Best Regards,

Samruddhi