nRF93M1 DK: PPP shell

RE: nRF93M1 DK: PPP shell

Macro Yau — Sun, 13 Sep 2026 07:03:04 GMT

Hi Simon, I am encountering a very similar issue with the PPP shell sample. I posted my details in a separate post: devzone.nordicsemi.com/.../nrf93m1-dk-ppp-shell-sample-unable-to-connect-to-network

RE: nRF93M1 DK: PPP shell

Simon D-M — Thu, 03 Sep 2026 11:07:25 GMT

Hello Marco,

Good catch! You are right, I didn't think about this...

I'm glad you managed to make it work. I guess the ppp shell sample also works now?

If you have more issue evaluating the nRF93M1 DK, feel free to ask again :)

Best regards,

Simon

RE: nRF93M1 DK: PPP shell

ing-barbiz — Thu, 03 Sep 2026 09:49:02 GMT

Hello,

I think I found the reason. the nRF93 module had a preset APN inside "pepper" (seems to be the one from Things Mobile).

After I deleted the apn with AT+CGDCONT=1, it then got the APN automatically from network.

In our applications, it is important to have the APN given from network auotmatically.

Marco

RE: nRF93M1 DK: PPP shell

Simon D-M — Thu, 03 Sep 2026 08:58:10 GMT

Hello,

[quote user="barbiz"]I thnk the .hex files refer to the same build.[/quote]

Oops, you are correct, It looks like I uploaded the ppp shell sample twice. Here is the correct Modem Bypass hex file : devzone.nordicsemi.com/.../modem_5F00_bypass.hex

[quote user="barbiz"]

However, I tested your shell build and I get the same behavior (no connection).

I have tried the onomndo sim included in the package (not sure if I have to activate it) and an activated sim from 1NCE and one from T-Mobile.

[/quote]

Can you maybe try to check if you are able to connect to the network with the Modem Bypass sample using the AT commands directly? (The AT interface is not on the same COM port as the startup message)

And also, how is the "NET" LED on the DK behaving? Is it doing long pulses, short pulses, or even something else?

Best regards,

Simon

RE: nRF93M1 DK: PPP shell

ing-barbiz — Wed, 02 Sep 2026 13:32:43 GMT

Hello,

I thnk the .hex files refer to the same build.

However, I tested your shell build and I get the same behavior (no connection).

I have tried the onomndo sim included in the package (not sure if I have to activate it) and an activated sim from 1NCE and one from T-Mobile.

My log stops here:

uart:~$ > net iface up 1
net iface up 1
EVENT: L3 [1] IPv4 mcast address add 224.0.0.1
Interface 1 is up
EVENT: L2 [1] interface admin up
[00:00:47.386,893] <inf> power_domain_gpio: modem_dcdc is now ON

Marco

RE: nRF93M1 DK: PPP shell

Simon D-M — Wed, 02 Sep 2026 10:41:49 GMT

Hi Marco,

[quote user="barbiz"]the ppp_shell builds, but never connects to the network[/quote]

That's strange, I was able to make it work on the very latest commit:

Do you see any active LEDs on the DK? Are you able to see the shell interface? And if you are, can you please show me some logs?

[quote user="barbiz"]the modem_bypass builds, but I get nothing on the serial[/quote]

For some reason, it seems like Zephyr doesn't get the "app.overlay" automatically in this version. Can you try to build the app with the following command:

west build -b nrf93m1dk@0.4.0/nrf54l15/cpuapp -p always -- -DEXTRA_DTC_OVERLAY_FILE=app.overlay

Also, the Serial port where startup logs are is not the one where you can send the AT commands, please try both serial port.

[quote user="barbiz"]which toolchain are you using to build? do you get the modem_bypass to work?[/quote]

I'm using the toolchain for NCS V3.4.0.

If you are still experiencing issues, can you maybe send me the exact commit that you are on, and also your hex file so that I can try your build on my board.

Also, here are the both hex files that I just built if you want to try them too:

- modem bypass: devzone.nordicsemi.com/.../7382.zephyr.hex

- ppp shell: devzone.nordicsemi.com/.../7382.zephyr.hex

Best regards,

Simon

RE: nRF93M1 DK: PPP shell

ing-barbiz — Tue, 01 Sep 2026 18:08:46 GMT

the ppp_shell builds, but never connects to the network
the modem_bypass builds, but I get nothing on the serial

which toolchain are you using to build? do you get the modem_bypass to work?

RE: nRF93M1 DK: PPP shell

Simon D-M — Tue, 01 Sep 2026 14:18:20 GMT

Hi Marco,

It looks like it is fixed now. Please try to pull the latest commits on the "main" NCS branch and run it again. (Don't forget to run "west update" after pulling the latest version to correctly update the SDK.)

It seems an intermediate version of Zephyr was causing some trouble.

And if you really want the blue LED to be ON, it looks like they forgot to configure the LED before using it. You can just modify the sample like this:

int main(void)
{
	/* LED4 blue */
	gpio_pin_configure_dt(&led_blue, GPIO_OUTPUT_ACTIVE);
	gpio_pin_set_dt(&led_blue, 1);	return 0;
}

Please tell me if it works for you too now.

Best regards,

Simon

RE: nRF93M1 DK: PPP shell

Simon D-M — Mon, 31 Aug 2026 13:05:50 GMT

Hi Marco,

I'm also quite new to the nRF93M1 DK, and I was able to get the same issue.

I'll look deeper into it, and I'll get back to you when I have as soon as I have a better answer.

Best regards,

Simon

RE: nRF93M1 DK: PPP shell

ing-barbiz — Sun, 30 Aug 2026 08:59:50 GMT

Just to add some further info: even building

nrf/samples/nrf93m1dk/modem_bypass

does not result in a working serial interface. But the serial interface was working when I first tested the board (there was some builtin firmware but it was not including ppp).

so I guess there is something not updated in the project?

thanks,
Marco