https://devzone.nordicsemi.com/f/nordic-q-a/129093/nrf54lm20-reset-pin-componentsI understand that the NRF54LM20 reference suggests not to put any sort of resistor or capacitor components on the reset pin and simply rely on the internal pullup. Since this is not something I encountered in MCUs before, I would still like to put componentsen-USTelligent Community 13Thu, 03 Sep 2026 11:09:11 GMThttps://devzone.nordicsemi.com/thread/570881?ContentTypeID=1Thu, 03 Sep 2026 11:09:11 GMT137ad170-7792-4731-bb38-c0d22fbe4515:f5b42869-7626-4c33-a364-93c7d16b0ef7EyalR<p>Thanks for the reply,</p> <p>Just want to make sure one more thing - Would there be any adverse affect if I use the more standard 10kohm + 100nF combination?&nbsp;</p><div style="clear:both;"></div>https://devzone.nordicsemi.com/thread/570879?ContentTypeID=1Thu, 03 Sep 2026 11:03:29 GMT137ad170-7792-4731-bb38-c0d22fbe4515:f3e39ead-e9c2-4762-8613-c9a003c5191fSwRa<p>Hello,</p> <p>You are right that the RC network on the RESET pin is not a requirement when using nRF54LM20 SoC&#39;s. However, it should be ok to have them as well. You can use the same R=1 KOhm and C=3.9pF combination.</p> <p>Regards,</p> <p>Swathy</p><div style="clear:both;"></div>