nRF905 distance maximum 30 cm

RE: nRF905 distance maximum 30 cm

Kenneth — Tue, 19 Apr 2016 11:43:03 GMT

Still my suggestion is to look into improving the connection between the boards. You might consider short the wires and solder them to the module. Is there any activity on the wires continuously, or only serial communication in-between radio transactions?

RE: nRF905 distance maximum 30 cm

jozefrv27 — Mon, 18 Apr 2016 14:44:27 GMT

Hello, this is connect

Connect Arduino UNO

VCC = 3,3V CE = DIGITAL PIN 4 CLK = unconnected, I did not know where AM = DIGITAL PIN 9 MISO = DIGITAL PIN 12 SCK = DIGITAL PIN 13 GND = GND

TXE = DIGITAL PIN 5 PWR = DIGITAL PIN 3 CD = DIGITAL PIN 7 DR = DIGITAL PIN 8 MOSI = DIGITAL PIN 11 CSN = DIGITAL PIN 10 GND = GND

both Arduino UNO involved as well.

Library uses this

I used a basic version code. Nothing I have not changed. Within one Arduina recorded RX and TX to another arduino. Im used example code.

Foto 1 Foto 2 Foto 3

RE: nRF905 distance maximum 30 cm

Kenneth — Mon, 11 Apr 2016 11:55:29 GMT

Hi, Can you share the schematic of the module, and the voltage on all the wires? I have a feeling there is some poor grounding here.