Application is not running in SDK V8 for mesh network

RE: Application is not running in SDK V8 for mesh network

bjorn-spockeli — Wed, 13 Apr 2016 12:24:45 GMT

@Manjunath: As I stated in my previous comment, nRF OpenMesh will only work with S110 v8.x and S130 v1.0. It is clearly stated on the GitHub page that nRF OpenMesh only works for SDK v8.1.

RE: Application is not running in SDK V8 for mesh network

Manjunath — Wed, 13 Apr 2016 12:13:14 GMT

one more thing in this link also i am facing some issue. link:github.com/.../nRF51-ble-bcast-mesh I tried with SDk6 and SD s110v7 ble_gateway app running but it is not advertising. I checked with master control panel application. could you please tell me why is like this?

RE: Application is not running in SDK V8 for mesh network

bjorn-spockeli — Wed, 13 Apr 2016 12:00:08 GMT

nRF OpenMesh will only work with S110 v8.x and S130 v1.0 and both these SoftDevices are compatible with the nRF51422 QFAC on the PCA10028.

RE: Application is not running in SDK V8 for mesh network

Manjunath — Wed, 13 Apr 2016 11:38:17 GMT

Bjorn thanks for your valuable reply.

pca10028 v1.1.0 will it work for this sdk v8 and SD s110v8?

I tried with SDk7 and SD s110v7 ble_gateway app running but it is not advertising. could you please tell me why is like this?

RE: Application is not running in SDK V8 for mesh network

bjorn-spockeli — Wed, 13 Apr 2016 11:20:19 GMT

Yes, QFAA G0 is IC revision 2 and is not compatible with S110 v8.0.0 or S130 v1.0, please see this page on our Infocenter.

RE: Application is not running in SDK V8 for mesh network

Manjunath — Wed, 13 Apr 2016 11:10:38 GMT

N51822QFAAG01342AA

RE: Application is not running in SDK V8 for mesh network

bjorn-spockeli — Wed, 13 Apr 2016 11:07:43 GMT

Could you provide the marking of the nRF51822 chip on your pca10001? I suspect that its a IC Revision 2 chip and it is therefore not compatible with the S110 v8.0.0 SoftDevice.

RE: Application is not running in SDK V8 for mesh network

Manjunath — Wed, 13 Apr 2016 10:54:56 GMT

Hi trond,

thanks for reply.

I did what you suggested, but it is not working. I tried with s110v8. Application is not even entering into main.

RE: Application is not running in SDK V8 for mesh network

Trond Einar Snekvik — Wed, 13 Apr 2016 10:05:40 GMT

Hi, Your application should start at the end of the Softdevice you're running with.

With S110v8, your application should start at 0x18000 in ROM (size=0x28000), and 0x20002000 in RAM (size=0x6000).

With S130, your application should start at 0x20000 in ROM (size=0x20000), and 0x20002800 in RAM (size=0x5800).

Try erasing the entire chip, program whichever softdevice you prefer (I recommend S110, as this is the main target for the framework), set the correct start-addresses and sizes in Keil. Compile and flash. You should see your device entering the main-function.