Unable to connect to NRF51822 with OpenOCD and STLink/V2 via SWD

RE: Unable to connect to NRF51822 with OpenOCD and STLink/V2 via SWD

Robert Lengyel — Mon, 27 Jun 2016 13:02:24 GMT

Thanks! I'll have to try that one out. I was disappointed I couldn't get the STLink/V2 to work, but if this IDAP-Link works, then I'll have to go with that. Full J-links are not exactly the cheapest devices.

RE: Unable to connect to NRF51822 with OpenOCD and STLink/V2 via SWD

Nguyen Hoan Hoang — Sat, 25 Jun 2016 21:33:18 GMT

The IDAP-Link works well with OpenOCD for both nRF51 & nRF52 and other IDE as well (Keil, CrossWorks, etc...). It also can parallel program multiple nRF5x device at the same time using multiple boards.

RE: Unable to connect to NRF51822 with OpenOCD and STLink/V2 via SWD

Robert Lengyel — Sat, 25 Jun 2016 12:14:14 GMT

Update:

Well I managed to program the device by switching to a J-link programmer. In the end, I couldn't resolve why the STLink/V2 was not working for my particular device, but, the overall goal of programming was still achieved.