ANT+ Examples with ANT+ Peripherals

RE: ANT+ Examples with ANT+ Peripherals

RixtronixLAB — Wed, 02 Dec 2020 03:33:31 GMT

You need to put the right flash address

RE: ANT+ Examples with ANT+ Peripherals

RixtronixLAB — Wed, 02 Dec 2020 03:32:32 GMT

Which channel do you use and which example ?

RE: ANT+ Examples with ANT+ Peripherals

RixtronixLAB — Sat, 14 Nov 2020 14:00:24 GMT

"....to see data printed to Putty via UART..."

Please let me know how ? thanks

RE: ANT+ Examples with ANT+ Peripherals

RixtronixLAB — Sat, 14 Nov 2020 07:51:34 GMT

Do you use this example for this project ?

<InstallFolder>\examples\ant\ant_plus\ant_bsc\bsc_rx

Thanks

RE: ANT+ Examples with ANT+ Peripherals

sardila — Fri, 22 Nov 2019 07:58:04 GMT

Hello!

If I understood correctly, you got what I'm trying to do! I'm trying to implement a bike computer, also using a nRF52 DK, and for that, I want to get information from sensors, and send this information via UART.

My main problem is that I use libraries provided in the SDK 16.0.0, and when I'm going to flash de nRF52 board, an error occurs. this error says that the code is trying to be allocated in a part of the memory already used by the soft device s212.

Could you please help me and explain how you could send via UART the information gotten via ANT+???

Thank you very much in advanced.

RE: ANT+ Examples with ANT+ Peripherals

ag — Sat, 23 Jul 2016 00:43:58 GMT

Awesome, worked on the first try after you pointed me to ant_key_manager_config.h! I can't believe it was so simple. I'll try the speed/cadence example next with a Garmin GSC10. After that my plan is to get speed/cadence from the GSC10 and power from button1/button2 to show up on putty/Edge 510. Cool!

RE: ANT+ Examples with ANT+ Peripherals

Øyvind Karlsen — Fri, 22 Jul 2016 22:18:17 GMT

Yes, I think so.

RE: ANT+ Examples with ANT+ Peripherals

ag — Fri, 22 Jul 2016 14:34:46 GMT

Hi Øyvind,

Thanks for your reply.

It looks like I should go into components/ant/ant_key_manager/config/ant_key_manager_config.h and change the empty {0, 0, 0, 0, 0, 0, 0, 0} network key with the one I got from the ANT website.

So if I'm able to successfully pair with my Garmin device, does that mean the power and rpm values I see printed over UART should reflect what I'm seeing on my Garmin?

Thanks! ag

RE: ANT+ Examples with ANT+ Peripherals

Øyvind Karlsen — Fri, 22 Jul 2016 11:55:55 GMT

Hi,

I don't know much about ANT, actually I'm pretty much on the same page as you, but I'll try to answer. The people who know ANT at the office are currently on vacation, so you may have better luck on the ANT forums.

Have you seen the documentation for the bike speed and cadence example?

The channel number should likely be set to the same as the sensor operates on (I think it should be 0), each profile has its own transmission type parameter (not sure how that influences things). The ANTPLUS_NETWORK_KEY is set in components/ant/ant_key_manager/config/ant_key_manager_config.h, once set it should be compatible with ANT+ devices.

The ANT+ receiver example in the SDK should print all the data received from a sensor over UART, and can be useful for debugging.

By the way the forums on THISISANT is a great resource for ANT related questions.

Best regards,

Øyvind