compiling error for ibeacon

RE: compiling error for ibeacon

tahse — Fri, 24 Feb 2017 17:19:48 GMT

If it helps anyone.... I had a similar issue. Everything looked right including the sdk_config.h file. I copied over only the sdk_config.h from the template and after setting it up with what I had before, everything worked.

RE: compiling error for ibeacon

Webmobi — Fri, 30 Dec 2016 04:45:47 GMT

I have raised a case in my page

RE: compiling error for ibeacon

Jørgen Holmefjord — Thu, 29 Dec 2016 13:41:38 GMT

That looks correct as well. These things are the only requirement for correct compilation if nothing is changed in the SDK. There could be some settings that makes this happen. Could you create a case on MyPage and upload your code, if you want to keep it confidential? That way it will be much easier finding the probem.

RE: compiling error for ibeacon

Webmobi — Thu, 29 Dec 2016 13:28:45 GMT

checkout the new updated image

RE: compiling error for ibeacon

Jørgen Holmefjord — Thu, 29 Dec 2016 13:19:51 GMT

Config looks OK. I cannot see any of the source files from your image. You need to add the files circled in the below image under the group nRF_Libraries in Keil:

RE: compiling error for ibeacon

Webmobi — Thu, 29 Dec 2016 13:08:19 GMT

check out i have added config file and image in original question

RE: compiling error for ibeacon

Jørgen Holmefjord — Thu, 29 Dec 2016 12:43:32 GMT

You have to edit your post or add an answer to upload the photo. You can copy the link that is generated into a comment afterwards.

RE: compiling error for ibeacon

Webmobi — Thu, 29 Dec 2016 12:38:14 GMT

how to upload photo into comments ?

RE: compiling error for ibeacon

Jørgen Holmefjord — Thu, 29 Dec 2016 12:24:24 GMT

Can you upload your project, or at least an image showing the included files in the project, and upload the sdk_config.h file?

RE: compiling error for ibeacon

Webmobi — Thu, 29 Dec 2016 05:25:31 GMT

I followed the procedure u mentioned above, but errors still exists

linking...

.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_timer_init (referred from main.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol ble_advertising_on_ble_evt (referred from main.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol fs_sys_event_handler (referred from main.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol nrf_ble_es_on_ble_evt (referred from main.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_button_disable (referred from bsp.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_button_enable (referred from bsp.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_button_init (referred from bsp.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_timer_create (referred from bsp.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_timer_start (referred from bsp.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol app_timer_stop (referred from bsp.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol ASSERT (referred from boards.o).
.\_build\nrf51422_xxac.axf: Error: L6218E: Undefined symbol nrf_gpio_pin_out_read (referred from boards.o).

RE: compiling error for ibeacon

Jørgen Holmefjord — Wed, 28 Dec 2016 11:58:55 GMT

Make sure you have added app_timer.c to nRF_Libraries, included app_timer.h header file in main.c, have APP_TIMER_ENABLED set in sdk_config.h and that the path to the header file is added to the include path. I have circled around the different things in the image below:

RE: compiling error for ibeacon

Webmobi — Wed, 28 Dec 2016 11:51:47 GMT

i have commented the line #include "bsp.c" , i am getting the error i posted originally

RE: compiling error for ibeacon

Jørgen Holmefjord — Wed, 28 Dec 2016 11:46:59 GMT

No, it should only be added in one group.

RE: compiling error for ibeacon

Webmobi — Wed, 28 Dec 2016 11:46:23 GMT

If the source file is added in one group, is it necessary to add it in another group?

RE: compiling error for ibeacon

Jørgen Holmefjord — Wed, 28 Dec 2016 11:28:13 GMT

The last errors you posted will come if you have included the bsp.c source file in main.c file (#include "bsp.c"). You should not include source files this way, add the source files to the Keil project by left clicking the folder, selecting Add existing files to group 'group'.. and browse to the file you want to add.

RE: compiling error for ibeacon

Jørgen Holmefjord — Wed, 28 Dec 2016 11:22:00 GMT

Can you check that there is no duplicate of sdk_config.h in your project and that app_timer_enable and button_enable is not defined anywhere else in your code? Which header files did you add to main?

RE: compiling error for ibeacon

Webmobi — Wed, 28 Dec 2016 10:26:46 GMT

i added two header files u mentioned in main , i got

.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_button_is_pressed multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_buttons_disable multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_buttons_enable multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_buttons_state_get multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_event_to_button_action_assign multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_indication_set multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_indication_text_set multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_init multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_wakeup_buttons_set multiply defined (by bsp.o and main.o).
.\_build\nrf51422_xxac.axf: Error: L6200E: Symbol bsp_wakeup_nfc_set multiply defined (by bsp.o and main.o).

RE: compiling error for ibeacon

Webmobi — Wed, 28 Dec 2016 10:22:47 GMT

i have added both source files in nrf_libraries, both app_timer_enable 1 and button_enable 1 are selected (ticked). But error not yet solved

RE: compiling error for ibeacon

Jørgen Holmefjord — Wed, 28 Dec 2016 09:42:14 GMT

Hi,

Have you added the source files of the timer (app_timer.c) and button (app_button.c) library to the project, and enabled the modules in the SDK configuration header using #define APP_TIMER_ENABLED 1 and #define BUTTON_ENABLED 1?

Best regards, Jørgen