media button become invalid when ble mouse reboot and connected to PC

RE: media button become invalid when ble mouse reboot and connected to PC

gootoomoon — Mon, 17 Mar 2014 12:34:06 GMT

Yes I get the notification from mouse

But it is the same as I catch data from ble-sniffer and wireshark

I can get the media button value but it's not work in windows just send data.

So can you see my notes on Monday, March 17 2014, 09:33?

I have already make sure that white list info story cause this phenomenon.

If I can store bonds story with "ble_bondmngr_bonded_centrals_store()" before disconnected.

RE: media button become invalid when ble mouse reboot and connected to PC

Håkon Alseth — Mon, 17 Mar 2014 10:52:43 GMT

Hi,

You will have to bond to the device, and then press "Enable services". Then you should get notifications from the mouse.

BR Håkon

RE: media button become invalid when ble mouse reboot and connected to PC

gootoomoon — Mon, 17 Mar 2014 10:27:58 GMT

I just program it with nRFgo Studio and firmware use this C:\Program Files\Nordic Semiconductor\Master Control Panel\3.5.0.8226\firmware\pca10000\MEFW_nRF51822_0.9.0_firmware.hex

It;s that be ok?

And I get some log from it, but when I press the button it causes nothing, so how can I reappear the problem with MasterControlPanel ?

I just do like this:

plug the dongle and program MEFW_nRF51822_0.9.0_firmware.hex into it with nRFgo Studio
Run the MasterControlPanel start the dongle server
Scan for devices
Select my ble device (nrf51822)
press the Service button to discovery service
I try to enable some service in HID service but not work, I know which UUID relate to media button

where to get the event data ? How can I find is it work or not?

Best regards

media button log.txt

RE: media button become invalid when ble mouse reboot and connected to PC

Håkon Alseth — Mon, 17 Mar 2014 09:02:42 GMT

Hi,

If you open MasterControlPanel, select the dongle COM-port, then go to "file -> Flash programming", then you should be pointed directly to the master control panel .hex file.

Try this to see if the behavior is similar.

Best regards Håkon

RE: media button become invalid when ble mouse reboot and connected to PC

gootoomoon — Mon, 17 Mar 2014 08:33:15 GMT

It seems that , when I connect to the PC and disconnected my ble device from PC then media button will be ok when connect again to the PC even reboot my ble device.

So it must be white list problem, because when ble device get the event of disconnected it will store something by "ble_bondmngr_bonded_centrals_store();"

And I try this:

when I erase all chip and program my ble app to the nrf51822 , connect to PC and mediabutton works well and

ble_hids_inp_rep_send(&m_hids,
                                         INPUT_REP_MPLAYER_INDEX,
                                         INPUT_REP_MEDIA_PLAYER_LEN,
                                         (uint8_t *)&mm_key);

will return 0

if I reboot my ble device and it will connect to PC auto , but ble_hids_inp_rep_send(); will return error code :"8". it means "Invalid state". And in this case left button right button works well but media button not.

I want to know that , is there any info from white list will be need for media button? Why other button and mouse move works well?

RE: media button become invalid when ble mouse reboot and connected to PC

gootoomoon — Sat, 15 Mar 2014 05:55:55 GMT

I try to wait 20s and power on my mouse behavior still there.

My dongle used for ble-sniffer how can I turn it back to use as master control panel?

RE: media button become invalid when ble mouse reboot and connected to PC

gootoomoon — Sat, 15 Mar 2014 03:16:48 GMT

Sometimes it works well when I reboot mouse after 10 seconds but sometimes not.

And it will send some media button auto.

I will add some print and check it again.

RE: media button become invalid when ble mouse reboot and connected to PC

Håkon Alseth — Fri, 14 Mar 2014 15:30:55 GMT

Hi,

Is it the same behavior if you use master control panel as well? Do you power the mouse on/off very quickly? Is it the same behavior if you wait 10 seconds before you power on the mouse?

Best regards Håkon