Change Project from nrf6310 to pca10001?

RE: Change Project from nrf6310 to pca10001?

Anton Maes — Wed, 30 Apr 2014 20:49:37 GMT

remember to rebuild the project after changing the board definition.

RE: Change Project from nrf6310 to pca10001?

plinzler — Thu, 10 Apr 2014 08:12:42 GMT

Thanks alot. That was exactly what I was looking for :)

RE: Change Project from nrf6310 to pca10001?

Håkon Alseth — Thu, 10 Apr 2014 07:42:13 GMT

That should be under "Options for Target 'myproject'" -> C/C++ tab -> Under the field "Define:".

RE: Change Project from nrf6310 to pca10001?

plinzler — Thu, 10 Apr 2014 07:36:29 GMT

First thing to do is to change the board define "BOARD_NRF6310" to "BOARD_PCA10001".

thank you for the quick answer. It was very helpful - but where do i find the "BOARD_NRF6310" definition?

I used the search funktion (whole project) and did not get a result that was useful.

RE: Change Project from nrf6310 to pca10001?

Håkon Alseth — Wed, 09 Apr 2014 12:53:39 GMT

The only thing that is different from PCA10001 and the nRF6310 board is the number of buttons and LEDs. Since the PCA10001 only has two buttons and LEDs, and most examples have >2 buttons/LEDs, you will have to do some manual editing to make it work.

First thing to do is to change the board define "BOARD_NRF6310" to "BOARD_PCA10001". Then change the number of buttons/LEDs to not exceed the number available on the PCA10001.

Best regards Håkon