Is there a programmatic interface (API) for nRFgo Studio

RE: Is there a programmatic interface (API) for nRFgo Studio

bjorn-spockeli — Tue, 29 May 2018 14:14:38 GMT

I recommend that you take a look this white paper.

RE: Is there a programmatic interface (API) for nRFgo Studio

Sridhar Jonnavittula — Tue, 29 May 2018 14:12:21 GMT

Hi kevin,

Did you get any inputs from anybody regarding your question above?

Thanks,

Sridhar

RE: Is there a programmatic interface (API) for nRFgo Studio

bjorn-spockeli — Thu, 18 May 2017 11:55:58 GMT

I suggest that you take a look at the DTM example in our SDK, see this Infocenter page and you should also take a look at this white paper.

RE: Is there a programmatic interface (API) for nRFgo Studio

Kevin — Thu, 18 May 2017 11:40:23 GMT

Thanks, so far that seems to be the only methord that shows some promise.

Kevin

RE: Is there a programmatic interface (API) for nRFgo Studio

Kevin — Thu, 18 May 2017 11:39:45 GMT

Thanks, do you have any code fragments that might help?

Kevin

RE: Is there a programmatic interface (API) for nRFgo Studio

Kevin — Thu, 18 May 2017 11:39:03 GMT

It is worth noting that we don't have direct access to the R&D department, they have simply stated what needs to be done which is:

Run nRFgo Studio and select the Direct Test Mode from the features selection on the left.
Select the appropriate Com port for the USB to 3V3 TTL serial adapter
In the mode box select Transmit
In the Channel box select Single.
Set the Channel to 0
Select payload model as constant carrier
Click start test.

So what I need to do is automate this process on a limited buget and timeframe.

Any help or pointers would be greatly appreciated! Kevin

RE: Is there a programmatic interface (API) for nRFgo Studio

endnode — Wed, 17 May 2017 21:28:32 GMT

Why you don't run DTM natively over UART? You can use anything for that (e.g. Python scripts on top of serial line interface which should work pretty much on any OS)... or you use something more then DTM?

RE: Is there a programmatic interface (API) for nRFgo Studio

John — Wed, 17 May 2017 17:55:49 GMT

You could probably reverse engineer the needed commands by capturing what nRFgo Studio is sending as commands to the DUT and then implement the same command pattern in your program.