RE: PCA10056 Silk Screen Errata

Julie H — Tue, 30 May 2017 13:56:37 GMT

Thanks! I didn't look at the pins I wasn't concern with.

RE: PCA10056 Silk Screen Errata

Jørgen Holmefjord — Tue, 30 May 2017 12:56:35 GMT

Hi,

I would not call this an errata, but I can agree that the silkscreen could be confusing. The order of the solderbridges are SB15, SB13, SB14 (SB25, SB23, SB24), so changing the silkscreen according to your suggestion is not correct either.

The intention of this silkscreen was to indicate the location of the SB1x and the SB2x since these are the groups of solderbridges that must be cut/shorted to reconfigure the pins from memory to pin header and not necessarily the individual solderbridge.

Please check the documentation for correct mappings.

Best regards,

Jørgen