How can I program nRF51822-Beacon

RE: How can I program nRF51822-Beacon

Petter Myhre — Tue, 30 Sep 2014 15:07:04 GMT

Fixed in the latest version.

RE: How can I program nRF51822-Beacon

Salman — Fri, 29 Aug 2014 19:52:16 GMT

Yes the pins disruption is wrong. see this link devzone.nordicsemi.com/.../

RE: How can I program nRF51822-Beacon

Ivan Gómez — Thu, 24 Jul 2014 07:49:13 GMT

So, with any TC2030 the nRF Beacon kit can be programmed?? I'm wondering about buying one, because now I'm having several problems programming it, because there are no compiling errors but often when I try to modify or especially using pointers Beacon stops working... And without a debugging process it's very complicated to figure out what is wrong in it. Any recommendation? Thanks.

RE: How can I program nRF51822-Beacon

Moritz — Tue, 22 Jul 2014 07:42:55 GMT

It's important to notice that pin 5 and pin 6 are wrongly interchanged in the current Beacon kit user guide. The table in chapter 5.5.4 should read: pin 5: GND pin 6: P0.11

RE: How can I program nRF51822-Beacon

FormerMember — Mon, 12 May 2014 09:35:49 GMT

Hello,

Yes, the programmer that comes with the development kit can be used to program the nRFbeacon. In addition, you have to connect the programmer to the beacon kit, it can for example be done using TC2030 from TagConnect, see the Beacon kit user guide chapter 5.5.4.

Edit 16.02.2015: It is also possible to use the Segger debugger on the nRF51-DK to program the beacon kit, see chapter 5.10 in the nRF51-DK user guide.

Regards, Kristin