RE: How to implement mbed uVisor on NRF52832

Jørgen Holmefjord — Wed, 05 Jul 2017 11:33:03 GMT

Sounds like your heap size is too big. Do you need 16 kB of heap?

RE: How to implement mbed uVisor on NRF52832

waldemar.gruenwald — Wed, 05 Jul 2017 10:31:16 GMT

NRF52832.ld:

/*
 * Copyright (c) 2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     www.apache.org/.../LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/* Linker script to configure memory regions. */

MEMORY
{
  FLASH (rx) : ORIGIN = 0x1C000, LENGTH = 0x64000
  RAM (rwx) :  ORIGIN = 0x20004000, LENGTH = 0xC000
}


OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")

/* Linker script to place sections and symbol values. Should be used together
 * with the other linker script that defines memory regions FLASH and RAM.
 * It references the following symbols that must be defined in code:
 *   Reset_Handler : Entry of reset handler
 *
 * It defines the following symbols that the code can use without definition:
 *   __exidx_start
 *   __exidx_end
 *   __etext
 *   __data_start__
 *   __preinit_array_start
 *   __preinit_array_end
 *   __init_array_start
 *   __init_array_end
 *   __fini_array_start
 *   __fini_array_end
 *   __data_end__
 *   __bss_start__
 *   __bss_end__
 *   __end__
 *   end
 *   __HeapLimit
 *   __StackLimit
 *   __StackTop
 *   __stack
 */
ENTRY(Reset_Handler)

/* Heap 1/4 of ram and stack 1/8 */
__stack_size__ = 0x2000;
__heap_size__ = 0x4000;

HEAP_SIZE  = DEFINED(__heap_size__)  ? __heap_size__  : 0x0400;
STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400;

SECTIONS
{
/*----------------------------------------*
 *             FLASH                      *
 *----------------------------------------*/

    /* Note: The uVisor expects this section at a fixed location, as specified
             by the porting process configuration parameter: FLASH_OFFSET. */
    __UVISOR_TEXT_OFFSET = 0x0;
    __UVISOR_TEXT_START = ORIGIN(FLASH) + __UVISOR_TEXT_OFFSET;
    .text __UVISOR_TEXT_START :
    {
	/* uVisor code and data */
        . = ALIGN(4);
        __uvisor_main_start = .;
        *(.uvisor.main)
        __uvisor_main_end = .;
        
	KEEP(*(.Vectors))
        *(.text*)

        KEEP(*(.init))
        KEEP(*(.fini))

        /* .ctors */
        *crtbegin.o(.ctors)
        *crtbegin?.o(.ctors)
        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
        *(SORT(.ctors.*))
        *(.ctors)

        /* .dtors */
        *crtbegin.o(.dtors)
        *crtbegin?.o(.dtors)
        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
        *(SORT(.dtors.*))
        *(.dtors)

        *(.rodata*)

        KEEP(*(.eh_frame*))
    } > FLASH

    .ARM.extab :
    {
        *(.ARM.extab* .gnu.linkonce.armextab.*)
        . = ALIGN(4);
    } > FLASH

    __exidx_start = .;
    .ARM.exidx :
    {
        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
        . = ALIGN(4);
    } > FLASH
    __exidx_end = .;

/*----------------------------------------*
 *               UVISOR                   *
 *----------------------------------------*/
    /* ensure that uvisor bss is at the beginning of memory */
    /* Note: The uVisor expects this section at a fixed location, as specified by
     * the porting process configuration parameter: SRAM_OFFSET. */
    __UVISOR_SRAM_OFFSET = 0x0;
    __UVISOR_BSS_START = ORIGIN(RAM) + __UVISOR_SRAM_OFFSET;
    .uvisor.bss __UVISOR_BSS_START (NOLOAD):
    {
        . = ALIGN(32);
        __uvisor_bss_start = .;

        /* protected uvisor main bss */
        . = ALIGN(32);
        __uvisor_bss_main_start = .;
        KEEP(*(.keep.uvisor.bss.main))
        . = ALIGN(32);
        __uvisor_bss_main_end = .;

        /* protected uvisor secure boxes bss */
        . = ALIGN(32);
        __uvisor_bss_boxes_start = .;
        KEEP(*(.keep.uvisor.bss.boxes))
        . = ALIGN(32);
        __uvisor_bss_boxes_end = .;

        . = ALIGN((1 << LOG2CEIL(LENGTH(RAM))) / 8);
        __uvisor_bss_end = .;
    } > RAM

    /* Heap space for the page allocator */
    .page_heap (NOLOAD) :
    {
        . = ALIGN(32);
        __uvisor_page_start = .;
        KEEP(*(.keep.uvisor.page_heap))
        . = ALIGN(32);
        __uvisor_page_end = .;
    } > RAM

    .data :
    {
        PROVIDE(__etext = LOADADDR(.data));
        . = ALIGN(4);
        __data_start__ = .;
        *(vtable)
        *(.data)
        *(.data*)

        . = ALIGN(4);
        /* preinit data */
        PROVIDE (__preinit_array_start = .);
        KEEP(*(.preinit_array))
        PROVIDE (__preinit_array_end = .);

        . = ALIGN(4);
        /* init data */
        PROVIDE (__init_array_start = .);
        KEEP(*(SORT(.init_array.*)))
        KEEP(*(.init_array))
        PROVIDE (__init_array_end = .);


        . = ALIGN(4);
        /* finit data */
        PROVIDE (__fini_array_start = .);
        KEEP(*(SORT(.fini_array.*)))
        KEEP(*(.fini_array))
        PROVIDE (__fini_array_end = .);

        . = ALIGN(4);
        /* All data end */
        __data_end__ = .;

    } > RAM AT > FLASH

    /* uvisor configuration data */
    .uvisor.secure :
    {
        . = ALIGN(32);
        __uvisor_secure_start = .;

        /* uvisor secure boxes configuration tables */
        . = ALIGN(32);
        __uvisor_cfgtbl_start = .;
        KEEP(*(.keep.uvisor.cfgtbl))
        . = ALIGN(32);
        __uvisor_cfgtbl_end = .;

        __uvisor_cfgtbl_ptr_start = .;
        KEEP(*(.keep.uvisor.cfgtbl_ptr_first))
        KEEP(*(.keep.uvisor.cfgtbl_ptr))
        __uvisor_cfgtbl_ptr_end = .;

        /* Pointers to all boxes register gateways. These are grouped here to allow
         * discoverability and firmware verification. */
        __uvisor_register_gateway_ptr_start = .;
        KEEP(*(.keep.uvisor.register_gateway_ptr))
        __uvisor_register_gateway_ptr_end = .;

        . = ALIGN(32);
        __uvisor_secure_end = .;
    } > FLASH

/*----------------------------------------*
 *          RAM from before UVISOR        *
 *----------------------------------------*/
 
    __etext = .;

    .data : AT (__etext)
    {
        __data_start__ = .;
        *(vtable)
        *(.data*)

        . = ALIGN(4);
        /* preinit data */
        PROVIDE_HIDDEN (__preinit_array_start = .);
        KEEP(*(.preinit_array))
        PROVIDE_HIDDEN (__preinit_array_end = .);

        . = ALIGN(4);
        /* init data */
        PROVIDE_HIDDEN (__init_array_start = .);
        KEEP(*(SORT(.init_array.*)))
        KEEP(*(.init_array))
        PROVIDE_HIDDEN (__init_array_end = .);


        . = ALIGN(4);
        /* finit data */
        PROVIDE_HIDDEN (__fini_array_start = .);
        KEEP(*(SORT(.fini_array.*)))
        KEEP(*(.fini_array))
        PROVIDE_HIDDEN (__fini_array_end = .);

        . = ALIGN(4);
        PROVIDE(__start_fs_data = .);
        KEEP(*(.fs_data))
        PROVIDE(__stop_fs_data = .);
        
        *(.jcr)
        . = ALIGN(4);
        /* All data end */
        __data_end__ = .;

    } > RAM

    __edata = .;

    .noinit :
    {
      PROVIDE(__start_noinit = .);
      KEEP(*(.noinit))
      PROVIDE(__stop_noinit = .);
    } > RAM
    
   
    .bss :
    {
        . = ALIGN(4);
        __bss_start__ = .;
        *(.bss*)
        *(COMMON)
        . = ALIGN(4);
        __bss_end__ = .;
    } > RAM

/* Note: The uVisor requires the original heap start and end addresses to be provided. */
    
    .heap (NOLOAD):
    {
        . = ALIGN(8);
        __end__ = .;
        end = .;
        __uvisor_heap_start = .;
        __HeapBase = .;
        . += HEAP_SIZE;
        __HeapLimit = .;
        __uvisor_heap_end = .;
        *(.heap*);

        /* Expand the heap to reach the stack boundary. */
        ASSERT(. <= (ORIGIN(RAM) + LENGTH(RAM) - 0x800), "heap region overflowed into stack");
        . += (ORIGIN(RAM) + LENGTH(RAM) - 0x800) - .;
    } > RAM
    PROVIDE(__heap_start = ADDR(.heap));
    PROVIDE(__heap_size = SIZEOF(.heap));
    PROVIDE(__mbed_sbrk_start = ADDR(.heap));
    PROVIDE(__mbed_krbs_start = ADDR(.heap) + SIZEOF(.heap));

    /* .stack_dummy section does not contain any symbols. It is only
     * used for the linker script to calculate the size of stack sections
     * and assign values to stack symbols later. */
    .stack (NOLOAD):
    {
        __StackLimit = .;
        *(.stack*)
        . += (ORIGIN(RAM) + LENGTH(RAM) - .);
    } > RAM

    /* Set the stack top to the end of RAM and move down the stack limit by
     * the size of the stack_dummy section. */
    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
    __StackLimit = __StackTop - SIZEOF(.stack);
    PROVIDE(__stack = __StackTop);

/*----------------------------------------------------*
 *        UVISOR RAM limits check                     *
 *----------------------------------------------------*/
   /* Check if data + heap + stack exceeds RAM limit */
    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
    /* Provide physical memory boundaries for uVisor. */
    __uvisor_flash_start = ORIGIN(FLASH);
    __uvisor_flash_end = ORIGIN(FLASH) + LENGTH(FLASH);
    __uvisor_sram_start = ORIGIN(RAM);
    __uvisor_sram_end = ORIGIN(RAM) + LENGTH(RAM);

}

/***************************************************************************************************/

startup_NRF52832.S:

/* 
 * Copyright (c) 2013 Nordic Semiconductor ASA
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 *   1. Redistributions of source code must retain the above copyright notice, this list 
 *      of conditions and the following disclaimer.
 *
 *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
 *      integrated circuit in a product or a software update for such product, must reproduce 
 *      the above copyright notice, this list of conditions and the following disclaimer in 
 *      the documentation and/or other materials provided with the distribution.
 *
 *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
 *      used to endorse or promote products derived from this software without specific prior 
 *      written permission.
 *
 *   4. This software, with or without modification, must only be used with a 
 *      Nordic Semiconductor ASA integrated circuit.
 *
 *   5. Any software provided in binary or object form under this license must not be reverse 
 *      engineered, decompiled, modified and/or disassembled. 
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */


/*
NOTE: Template files (including this one) are application specific and therefore
expected to be copied into the application project folder prior to its use!
*/

    .syntax unified
    .arch armv7e-m

    .section .Vectors
    .align 2
    .globl __Vectors
__Vectors:
    .long   __StackTop                  /* Top of Stack */
    .long   Reset_Handler
    .long   NMI_Handler
    .long   HardFault_Handler
    .long   MemoryManagement_Handler
    .long   BusFault_Handler
    .long   UsageFault_Handler
    .long   0                           /*Reserved */
    .long   0                           /*Reserved */
    .long   0                           /*Reserved */
    .long   0                           /*Reserved */
    .long   SVC_Handler
    .long   0                           /*Reserved */
    .long   0                           /*Reserved */
    .long   PendSV_Handler
    .long   SysTick_Handler

  /* External Interrupts */
    .long   POWER_CLOCK_IRQHandler
    .long   RADIO_IRQHandler
    .long   UARTE0_UART0_IRQHandler_v
    .long   SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler_v
    .long   SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler_v
    .long   NFCT_IRQHandler_v
    .long   GPIOTE_IRQHandler_v
    .long   SAADC_IRQHandler_v
    .long   TIMER0_IRQHandler_v
    .long   TIMER1_IRQHandler_v
    .long   TIMER2_IRQHandler_v
    .long   RTC0_IRQHandler
    .long   TEMP_IRQHandler_v
    .long   RNG_IRQHandler
    .long   ECB_IRQHandler
    .long   CCM_AAR_IRQHandler
    .long   WDT_IRQHandler_v
    .long   RTC1_IRQHandler_v
    .long   QDEC_IRQHandler_v
    .long   COMP_LPCOMP_IRQHandler_v
    .long   SWI0_EGU0_IRQHandler_v
    .long   SWI1_EGU1_IRQHandler_v
    .long   SWI2_EGU2_IRQHandler_v
    .long   SWI3_EGU3_IRQHandler_v
    .long   SWI4_EGU4_IRQHandler
    .long   SWI5_EGU5_IRQHandler
    .long   TIMER3_IRQHandler_v
    .long   TIMER4_IRQHandler_v
    .long   PWM0_IRQHandler_v
    .long   PDM_IRQHandler_v
    .long   0                           /*Reserved */
    .long   0                           /*Reserved */
    .long   MWU_IRQHandler
    .long   PWM1_IRQHandler_v
    .long   PWM2_IRQHandler_v
    .long   SPIM2_SPIS2_SPI2_IRQHandler_v
    .long   RTC2_IRQHandler_v
    .long   I2S_IRQHandler_v
    .long   FPU_IRQHandler_v


    .size    __Vectors, . - __Vectors

/* Reset Handler */

    .text
    .thumb
    .thumb_func
    .align 1
    .globl    Reset_Handler
    .type    Reset_Handler, %function
Reset_Handler:
    .fnstart


/*     Loop to copy data from read only memory to RAM. The ranges
 *      of copy from/to are specified by following symbols evaluated in
 *      linker script.
 *      __etext: End of code section, i.e., begin of data sections to copy from.
 *      __data_start__/__data_end__: RAM address range that data should be
 *      copied to. Both must be aligned to 4 bytes boundary.  */

    ldr    r1, =__etext
    ldr    r2, =__data_start__
    ldr    r3, =__data_end__

    subs    r3, r2
    ble     .LC0

.LC1:
    subs    r3, 4
    ldr    r0, [r1,r3]
    str    r0, [r2,r3]
    bgt    .LC1
.LC0:

    LDR     R0, =SystemInit
    BLX     R0
#if defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED)
    LDR	    R0, =uvisor_init    /* [*] Insert this. */
    BLX     R0                  /* [*] Insert this. */
#endif /* defined(FEATURE_UVISOR) && defined(TARGET_UVISOR_SUPPORTED) */
    LDR     R0, =nrf_reloc_vector_table
    BLX     R0
    LDR     R0, =_start
    BX      R0

    .pool
    .cantunwind
    .fnend
    .size   Reset_Handler,.-Reset_Handler

    .section ".text"


/* Dummy Exception Handlers (infinite loops which can be modified) */

    .weak   NMI_Handler
    .type   NMI_Handler, %function
NMI_Handler:
    B       .
    .size   NMI_Handler, . - NMI_Handler


    .weak   HardFault_Handler
    .type   HardFault_Handler, %function
HardFault_Handler:
    B       .
    .size   HardFault_Handler, . - HardFault_Handler


    .weak   MemoryManagement_Handler
    .type   MemoryManagement_Handler, %function
MemoryManagement_Handler:
    B       .
    .size   MemoryManagement_Handler, . - MemoryManagement_Handler


    .weak   BusFault_Handler
    .type   BusFault_Handler, %function
BusFault_Handler:
    B       .
    .size   BusFault_Handler, . - BusFault_Handler


    .weak   UsageFault_Handler
    .type   UsageFault_Handler, %function
UsageFault_Handler:
    B       .
    .size   UsageFault_Handler, . - UsageFault_Handler


    .weak   SVC_Handler
    .type   SVC_Handler, %function
SVC_Handler:
    B       .
    .size   SVC_Handler, . - SVC_Handler


    .weak   PendSV_Handler
    .type   PendSV_Handler, %function
PendSV_Handler:
    B       .
    .size   PendSV_Handler, . - PendSV_Handler


    .weak   SysTick_Handler
    .type   SysTick_Handler, %function
SysTick_Handler:
    B       .
    .size   SysTick_Handler, . - SysTick_Handler


/* IRQ Handlers */

    .globl  Default_Handler
    .type   Default_Handler, %function
Default_Handler:
    B       .
    .size   Default_Handler, . - Default_Handler

    .macro  IRQ handler
    .weak   \handler
    .set    \handler, Default_Handler
    .endm

    IRQ  POWER_CLOCK_IRQHandler                          /* restricted */
    IRQ  RADIO_IRQHandler                                /* blocked    */
    IRQ  UARTE0_UART0_IRQHandler_v
    IRQ  SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler_v
    IRQ  SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler_v
    IRQ  NFCT_IRQHandler_v
    IRQ  GPIOTE_IRQHandler_v
    IRQ  SAADC_IRQHandler_v
    IRQ  TIMER0_IRQHandler_v
    IRQ  TIMER1_IRQHandler_v
    IRQ  TIMER2_IRQHandler_v
    IRQ  RTC0_IRQHandler                                 /* blocked    */
    IRQ  TEMP_IRQHandler_v
    IRQ  RNG_IRQHandler                                  /* restricted */
    IRQ  ECB_IRQHandler                                  /* restricted */
    IRQ  CCM_AAR_IRQHandler                              /* blocked    */
    IRQ  WDT_IRQHandler_v
    IRQ  RTC1_IRQHandler_v
    IRQ  QDEC_IRQHandler_v
    IRQ  COMP_LPCOMP_IRQHandler_v
    IRQ  SWI0_EGU0_IRQHandler_v
    IRQ  SWI1_EGU1_IRQHandler_v                          /* restricted for Radio Notification */
    IRQ  SWI2_EGU2_IRQHandler_v                          /* blocked for SoftDevice Event */
    IRQ  SWI3_EGU3_IRQHandler_v
    IRQ  SWI4_EGU4_IRQHandler                            /* blocked    */
    IRQ  SWI5_EGU5_IRQHandler                            /* blocked    */
    IRQ  TIMER3_IRQHandler_v
    IRQ  TIMER4_IRQHandler_v
    IRQ  PWM0_IRQHandler_v
    IRQ  PDM_IRQHandler_v
    IRQ  MWU_IRQHandler                                  /* restricted */
    IRQ  PWM1_IRQHandler_v
    IRQ  PWM2_IRQHandler_v
    IRQ  SPIM2_SPIS2_SPI2_IRQHandler_v
    IRQ  RTC2_IRQHandler_v
    IRQ  I2S_IRQHandler_v
    IRQ  FPU_IRQHandler_v
    
  .end

RE: How to implement mbed uVisor on NRF52832

Jørgen Holmefjord — Wed, 05 Jul 2017 09:23:17 GMT

Can you upload you linker and config file?