How to programme the nrf51822

RE: How to programme the nrf51822

Sigurd — Mon, 14 Aug 2017 08:49:28 GMT

Hi,

Do you have any programmer/debugger? You need a programmer that support SWD. We recommend Segger programmers. If you buy a nRF51-DK, you can use the on-board Segger J-link programmer that is on the board.

RE: How to programme the nrf51822

Nguyen Hoan Hoang — Sun, 13 Aug 2017 06:33:08 GMT

Yes and no. Yes, you can flash your code using eclipse debug (OpenOCD + GDB) No, Softdevice is required (BLE stack). This must be flashed outside of Eclipse. Is done once only, unless you erase it. Both Jlink & IDAP-Link has commandline flashing tools

RE: How to programme the nrf51822

Salman Faris — Sun, 13 Aug 2017 06:27:44 GMT

it can be burn programme with eclipse ide ...?

RE: How to programme the nrf51822

Nguyen Hoan Hoang — Sun, 13 Aug 2017 05:12:38 GMT

Click on the Tutorial menu above to get started. You can use free Eclipse IDE with GCC see this blog. You will need a JTag to program the chip. You can use either the Segger JLink or an alternative solution the IDAP-Link.