https://devzone.nordicsemi.com/f/nordic-q-a/24545/pdm-sample-rate-of-nrf52810According to the PDM of the nRF52810 datasheet，the input of the filter is the two-channel PDM serial stream (with left channel on clock high, right channel on clock low), its output is 2 &#215; 16-bit PCM samples at a sample rate 64 times lower than the PDMen-USTelligent Community 13Tue, 22 Aug 2017 11:08:51 GMThttps://devzone.nordicsemi.com/thread/96617?ContentTypeID=1Tue, 22 Aug 2017 11:08:51 GMT137ad170-7792-4731-bb38-c0d22fbe4515:3e9807fa-9f4b-4e4c-91ba-68d9efbcfcc7J&#248;rn<p>Hello</p> <p>The reason you have an error is that the PDM clock generator uses integer division to generate the PDM clock from HFCLK. In the electrical specifications it states f=1.024MHz, however this is an error and I have reported it internally. The closest frequencies to 1.024MHz are 1.0MHz and 1.032MHz as you stated. You can generate other frequencies as well, however the frequencies stated in the datasheet are the only tested and verified values so we cannot guarantee its operation with other frequencies.</p> <p>Also see <a href="https://devzone.nordicsemi.com/question/150326/freedom-pdm-clock-set/">this link</a> and <a href="https://devzone.nordicsemi.com/question/87264/single-pdm-microphone-at-higher-pcm-sampling-rate/">this link</a>.</p> <p>Best regards</p> <p>Jørn Frøysa</p><div style="clear:both;"></div>