project using nRF52832

RE: project using nRF52832

Nguyen Hoan Hoang — Fri, 25 Aug 2017 02:46:15 GMT

You can use fully free Eclipse & GCC, See this blog.

RE: project using nRF52832

Matt — Thu, 24 Aug 2017 13:42:28 GMT

Do get a JLink for debug and tracing purpose, especially for testing with RTT.

RE: project using nRF52832

Joakim Jakobsen — Thu, 24 Aug 2017 13:12:47 GMT

Hi testmyskills!

In addition to the suggestions already provided by RK and idelsink, I would suggest that you try Segger Embedded Studio. Segger Embedded Studio is a royalty-free IDE with no code limit, and is specifically designed for embedded development. Take a look at this blog post about how to get started.

Best regards,
Joakim.

RE: project using nRF52832

idelsink — Thu, 24 Aug 2017 07:54:35 GMT

I myself made a CMake project and use the arm gdb in the terminal without any problems. Just start a gdb server and connect to it using gdb.

RE: project using nRF52832

RK — Thu, 24 Aug 2017 06:18:30 GMT

Not only can you use GCC, there are examples in the SDK showing how. In fact every example in the SDK builds with GCC. There are also several other IDEs you can use, some free. If you use the search you will find a ton of discussion about this and a load of blog posts