52832 can't enter the interrupt

RE: 52832 can't enter the interrupt

yu-wang — Thu, 07 Sep 2017 09:24:13 GMT

Thanks very much! I really didn't do that! I will try it tomorrow,thanks again. I want to be your friend, do you agree? and if we become friend,how can we communicate?

RE: 52832 can't enter the interrupt

Jørgen Holmefjord — Thu, 07 Sep 2017 09:12:20 GMT

Are you enabling the SAADC IRQ in NVIC peripheral, as shown in this example?

RE: 52832 can't enter the interrupt

yu-wang — Thu, 07 Sep 2017 02:05:24 GMT

I am so sorry that I can't open the blog! I do not know the reason,maybe there are some limits to access the internet,because I am in china. Can you share you code to me and I just reference.Thanks a lot!

RE: 52832 can't enter the interrupt

Nguyen Hoan Hoang — Thu, 07 Sep 2017 01:59:14 GMT

Are you compiling C++ ? if so then add extern "C" in front of it extern "C" void SAADC_IRQHandle(). Yes I do write my own. You cna find it from this blog.

RE: 52832 can't enter the interrupt

yu-wang — Thu, 07 Sep 2017 01:55:00 GMT

Thanks all the same , do you use the ADC by register?(nrf52832)

RE: 52832 can't enter the interrupt

yu-wang — Thu, 07 Sep 2017 01:54:01 GMT

I know that, firstly I use the"void SAADC_IRQHandler()",but I found that the program can't enter the interrupt. Then I found there is "#define ADC_IRQHandler SAADC_IRQHandler " in nrf51_to_nrf52.h.

RE: 52832 can't enter the interrupt

Nguyen Hoan Hoang — Thu, 07 Sep 2017 01:50:00 GMT

Look into the interrupt vector table as to which name it is used. It has to match. My version is void SAADC_IRQHandler()