advertise nrf52840 unlimitedly.

RE: advertise nrf52840 unlimitedly.

karthikeyan — Thu, 02 Nov 2017 09:57:55 GMT

thank you so much

RE: advertise nrf52840 unlimitedly.

Joakim Jakobsen — Thu, 02 Nov 2017 09:47:09 GMT

I'm glad that it works. Happy to help.
Regarding your beacon case, you already have one of our application engineers working on the case, and you are in good hands.
Best regards.

RE: advertise nrf52840 unlimitedly.

karthikeyan — Thu, 02 Nov 2017 09:39:23 GMT

thank you very much joakim. it works fine. i have posted a question on ble_app_beacon. can you help me on that

RE: advertise nrf52840 unlimitedly.

karthikeyan — Thu, 02 Nov 2017 09:32:59 GMT

Thanks for your response joakim, i will check it out and let you know

RE: advertise nrf52840 unlimitedly.

Joakim Jakobsen — Thu, 02 Nov 2017 09:14:20 GMT

Hi karthikeyan!

No need to comment out the BLE_ADV_EVT_IDLE and BSP_EVENT_SLEEP.

Set the APP_ADV_TIMEOUT_IN_SECONDS to 0.

And remember to change the:

init.advdata.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;

to:

init.advdata.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;

Best regards,
Joakim.

RE: advertise nrf52840 unlimitedly.

karthikeyan — Thu, 02 Nov 2017 09:03:35 GMT

hi bastien reynard, thanks for ur response. i done that also. if i do that my LED1 is not blinking and i cant see my device in nrf connect app.

RE: advertise nrf52840 unlimitedly.

Bastien Reynard — Thu, 02 Nov 2017 08:51:24 GMT

Setting APP_ADV_TIMEOUT_IN_SECONDS to 0 should disable the timeout.