uploading soft device

RE: uploading soft device

Joakim Jakobsen — Mon, 13 Nov 2017 12:39:56 GMT

You can click the grey "check-box" to the left on the answer :)

RE: uploading soft device

Jim — Mon, 13 Nov 2017 12:39:10 GMT

OK Joakim, but I cant see how to "accept the answer as correct"

RE: uploading soft device

Joakim Jakobsen — Mon, 13 Nov 2017 12:32:43 GMT

No problem! Happy to help.
If your problem was solved, please consider accepting the answer as correct.
Best regards.

RE: uploading soft device

Jim — Mon, 13 Nov 2017 12:29:38 GMT

OK Joakim, thanks for that speedy and concise explanation.

RE: uploading soft device

Joakim Jakobsen — Mon, 13 Nov 2017 10:41:28 GMT

Hi Jim!

You can choose to the method that you want.
Both nRFGo Studio and nrfjprog can be used to flash the softdevice to your device.

However, there is also possible to do this directly in SEGGER Embedded Studio.
In SES, go to Target and make sure that the J-link is connected.
When connected, go to Download File -> Download Intel Hex File... -> and choose the softdevice to flash to your device.
The softdevice can also be added to load together with your application using the additional load file.
Take a look at this youtube video at: 04.10 minutes where the additional load file is and how to add your softdevice is explained.

The youtube video is a part of our:
Getting started with SEGGER Embedded Studio video tutorial series on youtube that you can take a look at.

Let me know if you have any questions.
Best regards,
Joakim.