Definitive guide for 'meander' PCB antenna?

RE: Definitive guide for 'meander' PCB antenna?

sd — Wed, 11 Jun 2014 09:59:09 GMT

For future reference this is what I measured from the Gerbers: width=0.25 mm; segments 4.125, 2.2, 2.93, 2.0, 2.93, 1.95, 2.93, 1.95, 2.93, 1.85, 1.54 mm. This is measured the central spine of the antenna.

RE: Definitive guide for 'meander' PCB antenna?

thomas — Tue, 10 Jun 2014 15:27:06 GMT

Maybe these links can help you :

http://www.ti.com/lit/an/swra117d/swra117d.pdf

http://www.ti.com/lit/an/swra351a/swra351a.pdf

I'have the eagle lib for planar antenna but a can't attach it ( >10pt ??)

RE: Definitive guide for 'meander' PCB antenna?

sd — Tue, 10 Jun 2014 11:31:03 GMT

Thanks for your answer. I assume that copying the antenna from the dongle would work...? I simply wanted the dimensions instead of measuring it, which isn't accurate at all. Other than the nWP-008 are there other resources on antennas?

RE: Definitive guide for 'meander' PCB antenna?

FormerMember — Tue, 10 Jun 2014 11:20:12 GMT

Unfortunately, we don't have any definitive guide for the meander antenna. It can be a little tricky to design a meander antenna, because it radiates from the corners; when designing a meander antenna you want to make sure that the signals radiated from the corners result in construvtive interfernce.

In general we recommend to use the meander antenna on the dongle, because it has a decent range.

Edit: If you download the hardware files for the dongle (comes with the evaluation/development kit hardware files), you can measure the dimensions for the antenna fairly accurate using the altium or gerber files.