ppk install 2

RE: ppk install 2

wlgrd — Tue, 05 Dec 2017 09:02:12 GMT

Make sure you have installed python 2.7, and not python 3.

RE: ppk install 2

Sigurd — Tue, 04 Jul 2017 09:31:10 GMT

If the PPK is used with the nRF5x DK, prepare the nRF5x DK for power measurements by cutting the PCB track shorting solder bridge SB9 according to Preparing the development kit board.

After the PPK is placed on the DK, could you then you try to flash the PPK with the flash_ppk.py script, and then run the ppk.py right after that:

1. python.exe flash_ppk.py

2. python.exe ppk.py

RE: ppk install 2

Hyeongseok — Tue, 04 Jul 2017 00:59:49 GMT

Thank you!! this problem is solved! but, there is another problem. In python window, errer message: 'Initialization failed, could not read calibration values'. and, fail to find 'ordinal 4684'. how to solve...

RE: ppk install 2

Sigurd — Mon, 03 Jul 2017 07:26:17 GMT

Hi,

You need to install Python 2.7.13, and set PATH environmental variable.

To add the Python directory to the path for a particular session in Windows −

At the command prompt − type path %path%;C:\Python27 and press Enter.

(Assuming that you have installed Python at C:\Python27)