How to run the mesh light demo v1.0.0

RE: How to run the mesh light demo v1.0.0

Bjørn Kvaale — Mon, 29 Jan 2018 14:40:23 GMT

Nordic is working on a mesh app. If you want a release date, you can send me a private link & I can give you the contact info for your local regional sales manager.

RE: How to run the mesh light demo v1.0.0

Bjørn Kvaale — Mon, 29 Jan 2018 14:38:51 GMT

I just tested with the same setup you have, an nrf52840pdk as client, two nrf52dks as servers & an nrf51dk as a server. I had the same error that you had, but I finally got it working in the end. I have tested with the light_switch client example nrf52840_xxAA_s140_5_0_0-3_alpha & the server examples nrf51422_xxAC_s130_2_0_1 & nrf52832_xxAA_s132_5_0_0. First, only turn on the 52840 kit, compile the client example, connect to the Jlink, do an eraseall & download the example to the device. Then, turn off the device. Then, continue with the next device & repeat the same process. Repeat for the other two client devices. Once all the devices are flashed & turned off, turn on the client device first & the server devices next one by one. Then, the example should work like mentioned in this link.

RE: How to run the mesh light demo v1.0.0

Alice — Thu, 25 Jan 2018 05:53:01 GMT

Yes, I have read it.

I use a PAC10056 ,two PCA10040 and one PCA10028. After reset and wait for a minute, the two PCA10040 have been provisioned and I could use button on the PCA10056 to control them. But PCA10028 has not been provisioned and for LED is on.I don't know why.

Our colleague also use CSR to do SIG mesh and CSR has a APP to do the provision. But the APP have not search the PCA10056, PCA10040 and PCA10028.Would nordic publish a APP to do the provision? Thanks

RE: How to run the mesh light demo v1.0.0

Bjørn Kvaale — Wed, 24 Jan 2018 14:28:31 GMT

If in doubt, always take a look at the nordic infocenter. Have you taken a look at this link yet?