https://devzone.nordicsemi.com/f/nordic-q-a/30446/nrf8001-active-signalMy application needs to be notified of large current draws due to the activity of the nRF8001. The active signal works fine for this purpose, but why is it available only for intervals of 30ms and longer? Is there another event generated by the nRF8001en-USTelligent Community 13Thu, 15 Feb 2018 20:05:22 GMThttps://devzone.nordicsemi.com/thread/121018?ContentTypeID=1Thu, 15 Feb 2018 20:05:22 GMT137ad170-7792-4731-bb38-c0d22fbe4515:57d27fd7-2c73-4b19-849f-7b6b103c2629run_ar<p>Unfortunately there are no other events I can think about that occur every connection event. But you might be able to use events such as the data received event or data credit event to synchronize the timer of the application mcu vs the known connection interval to avoid that it drifts to far of. However I have never done this, so not sure if it will work. And I guess it requires some measurements to check when the events occur relative to the connection event, I suggest you do that at slower intervals and measure the delta vs the active line.</p><div style="clear:both;"></div>