Peripheral, central and mobile device

RE: Peripheral, central and mobile device

Martin Lesund — Mon, 12 Mar 2018 14:53:14 GMT

I would recommend you to look at this BLE relay example and you can use that as reference for your application.

RE: Peripheral, central and mobile device

Javier — Mon, 12 Mar 2018 08:34:37 GMT

Hi Martin, thank you for answer.

I was looking for posts with similar question and I found some interesting posts (post) where explain something similar. Reference your answer, in the first point, all ok, I understand it, but in the second point, he has 3 boards, A (Central) and B,C (peripheral), he has connected his boards this way: B <-> A <-> C and he needs that board B sends datas directly to the board C, for this, he disconnect B and connect it to C board.

In my case, I don´t need to disconnect the devices:

Peripheral board <-> Central/pheriperal board <-> Mobile devices

For my case, is posible that Central/Pheriperal board can manages all Bluetooth message from pheriperal and mobile devices without disconnect any boards?

Thank.

RE: Peripheral, central and mobile device

Martin Lesund — Thu, 08 Mar 2018 12:24:04 GMT

Hello Javier,

You can have the mobile device connect to the "central board" if it runs as both Central/Peripheral roles. Like these examples.
Answer to your second question