The error message shows up after building the mesh demo code to thingy 52

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Wed, 02 May 2018 12:54:07 GMT

Hello William,

Would you please help me to check if you already"unchecked" the "Parse known characteristics" in the nRFconnect on Android ? Please leave that item checkbox in blank :)

RE: The error message shows up after building the mesh demo code to thingy 52

William — Wed, 02 May 2018 08:56:29 GMT

I have 4 Nordic thingy:52
1 for mesh bridge
3 for node (node 0~2)
Use the demo morcos( Mesh Demo.xml ) can work properly,
But i send the code directly via Nordic UART Service/ RX Characteristic
The specified node is not work...

Thanks

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Wed, 02 May 2018 08:48:45 GMT

Hello William,

Glad to hear that the Thingy mesh demo macro works 🙂

Would it possible for me to know how many nodes do you have in your mesh network now?

RE: The error message shows up after building the mesh demo code to thingy 52

William — Wed, 02 May 2018 08:44:42 GMT

Thanks!

I load the Thingy Mesh Demo.xml to the nRF Connect and The mesh demo macros(thingy mesh demo) is work properly!

I tried send the bleow command to the thingy bridge via Nordic UART Service/ RX Characteristic, But the specified node is not work after send command.
Command: 0x0002030100FF00

Operation procedure:

1. Connect to the Thingy Bridge node use the nRF Connect,
2. Select the Client page
3. Send command "0x0002030100FF00" to the Nordic UART Service/ RX Characteristic
4. The specified node is not work after send command.

My Operation procedure is right or not?
How to solve this problem?

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Thu, 26 Apr 2018 10:54:03 GMT

Hello William,

Glad to hear that the demo works 😃

I would like to suggest you check the following link for import the "Thingy Mesh Demo.xml"

https://www.youtube.com/watch?v=rWOws3uhN6o

This video was prepared for old macros, but we can use the same way to import the "Thingy Mesh Demo.xml".

RE: The error message shows up after building the mesh demo code to thingy 52

William — Thu, 26 Apr 2018 10:28:50 GMT

Thanks!

After use the nrfjprog to erase the Thingy and reprogram, The problem is solved!
The Thingy bridge and Thingy node can auto connection, And the bridge can control light via button on the Thingy.

After use the RFConnect on the Android phone and loaded the macro from link,

My procedure is "menu => Configure GATT server => press "Sample configuration" on the top bar => press the "downlaod icon" => load the [Thongy Mesh Demo.xml].

The error message "attribute 'lang' does not have a match in class no.nordicsemi.android.mcp.server.domain.ServerConfiguration at line 8" shows up.

How to solve this problem?

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Wed, 25 Apr 2018 02:41:51 GMT

Hello William,

Great that now the firmware can be compiled 🙂

Regarding with your questions now:

1. No, it is not correct. The bridge should not change it color. Would you please use nrfjprog to erase the Thingy and reprogram it? If it still doesn't help, please attach the J-Link and open the RTT viewer to see if there's any error log? Or please program the precompiled hex to see if the bridge works or not
https://github.com/NordicPlayground/Nordic-Thingy52-mesh-demo/tree/master/precompiled_hex

2. The AUTO_PROV is in here
https://github.com/NordicPlayground/Nordic-Thingy52-mesh-demo/blob/master/Thingy_bridge/pca20020_s132/ses/sdk_mod/provisioner.c#L60

3. For now the nRFMesh is only for internal test and is not available to the public at current stage.

I would like to suggest you use nRFConnect on Android with the newest macro for demo
https://github.com/NordicPlayground/Nordic-Thingy52-mesh-demo/tree/master/nRFConnect_macros/nRF%20Connect%204.18%20or%20newer

RE: The error message shows up after building the mesh demo code to thingy 52

William — Tue, 24 Apr 2018 08:13:07 GMT

Thanks!

After re-download the entire project from the github, The problem of error message is solved!

But, I have opnother questions for the demo document

https://github.com/NordicPlayground/Nordic-Thingy52-mesh-demo

1. Follow the step 7, After Thingy bridge turned on, We should look the red breath light, But current we look is yellow breath light! Is it correct?
(Now, I have complete 2 device, One as Thingy bridge(yellow breath light), another one is Thingy node(green flash light), Both is standalone, it is seen not connected.)

2. It can disable the auto-provisioning function by undefine the macro "AUTO_PROV", Where can i find (What file can find this marco?)

3. Follow the step 9, Where can i download the APP "nRFMesh", Is this an Android app? (I cannot find this app under Android Play Market)

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Tue, 24 Apr 2018 06:37:34 GMT

Hello William,

No, I won't suggest you use the latest softdevice, some of the API may not compatible.

I would assume you download the Thingy project zip file from nordicsemi.com.

I would like to suggest you download the entire project from the github:

https://github.com/NordicSemiconductor/Nordic-Thingy52-FW

Or simply use the hex inside:

https://github.com/NordicSemiconductor/Nordic-Thingy52-FW/tree/master/external/sdk13/components/softdevice/s132/hex

Hope this can do help :)

RE: The error message shows up after building the mesh demo code to thingy 52

William — Tue, 24 Apr 2018 06:24:17 GMT

There is no file "s132_nrf52_4.0.2_softdevice.hex" can be found under the "C:\Nordic\mesh2\Nordic-Thingy52-FW-release-v2.1.0\external\sdk13\components\softdevice\s132\hex"

Can i use the newest version of softdevice(.hex) to replace this file? Such as s132_nrf52_6.0.0_softdevice.hex

Or, Where can i download this file "s132_nrf52_4.0.2_softdevice.hex"

Thanks!

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Tue, 24 Apr 2018 06:07:41 GMT

Hello William,

I would assume you faced some path or naming/encoding issue in windows system.

Would you please:

1. Copy the softdevice "s132_nrf52_4.0.2_softdevice.hex" which is under: "Nordic-Thingy52-FW\external\sdk13\components\softdevice\s132\hex" to the "Nordic-Thingy52-FW\sdk_components\softdevice\s132\hex"

2. Or, please right click the on the project and choose "Edit options" like

And select the column "Debug" -> "Loader", and choose "Additional Load file[0]"

And modfiy the path by selecting the softdevice hex file which is under

"Nordic-Thingy52-FW\external\sdk13\components\softdevice\s132\hex\s132_nrf52_4.0.2_softdevice.hex"

Hope this can do help :)

RE: The error message shows up after building the mesh demo code to thingy 52

William — Tue, 24 Apr 2018 05:41:23 GMT

1. I rerun all step from 1 to 5(delete old, create new), After executed the “setup_sdk.bat”, The log capture as attach file. (seems to no error?)

devzone.nordicsemi.com/.../bat.txt

2. The folder “sdk_components” is available in the “Nordic-Thingy-52-FW” folder

3. There is no file “”, in the foldar Nordic-Thingy52-FW\sdk_components\softdevice\s132\hex, Where can i find this file?

RE: The error message shows up after building the mesh demo code to thingy 52

Jui-Chou (Rick) Chung — Tue, 24 Apr 2018 03:48:20 GMT

Hello William,

Would you please help me to check:

1. Have you executed the "setup_sdk.bat" which inside the "Nordic-Thingy-52-FW" folder? Have you met any error messages?

2. Is there a folder "sdk_components" inside the "Nordic-Thingy-52-FW" folder?

3. Under the path "Nordic-Thingy52-FW\sdk_components\softdevice\s132\hex", is there the softdevice file "s132_nrf52_4.0.2_softdevice.hex" inside ?