Interactive PyACI

RE: Interactive PyACI

Mttrinh — Thu, 13 Feb 2020 16:40:32 GMT

Hi,

It doesn't seem to be the exact same issue. Also it is an old thread.

[quote user="nabilneh"] I was able to run the library[/quote]

To my understanding you have made it worked before but not anymore?

I would suggest you make a new ticket with more information and details on what you have done so far.

RE: Interactive PyACI

Nabil — Thu, 13 Feb 2020 09:12:26 GMT

Hello,

I have the same problem. I was able to run the library. For the past few days this has given me the same error (photo below)

I'm working with mesh SDK v4. With 2 devkit board.

Echo command is not working too. I have tried on windows and macos.

How is it possible ?

Thank you very much !

RE: Interactive PyACI

Mttrinh — Wed, 16 May 2018 08:57:12 GMT

Hi,

Can you try with Python 32bit version?

RE: Interactive PyACI

vijayrakesh — Mon, 07 May 2018 10:20:46 GMT

In Additional Load File [0] "s132_nrf52_6.0.0_softdevice.hex" is already present as shown in below screenshot

RE: Interactive PyACI

Mttrinh — Mon, 07 May 2018 09:30:26 GMT

The softdevice should be included when you flash the application with SES. Can you check if the "Additional Load File" is pointing to the softdevice hex file?(Right click on your Project -> "Edit Options" -> "Loader" -> "Additional Load File")

RE: Interactive PyACI

vijayrakesh — Mon, 07 May 2018 04:21:41 GMT

Yeah, I'm using SES, and I flashed only serial application (Opened Serial SES project file and flashed) Do i need to flash softdevice? If yes, How to flash it?

RE: Interactive PyACI

Mttrinh — Fri, 04 May 2018 08:09:27 GMT

Hi,

I managed to reproduce this issue. I got this issue when only flashing the serial application without the softdevice. Have you flashed over the sofdevice? Are you using SES?

RE: Interactive PyACI

vijayrakesh — Thu, 03 May 2018 04:43:57 GMT

Yeah, I'm using latest Mesh SDK v2.0.1 and also tried to using other COM port. While going through the documentation i came up to BeaconParamsSet command, After that trying to send an echo "for i in range(0, 10): send(cmd.Echo("Hello: " + str(i))); time.sleep(1)" for this input i'm not getting an output.

RE: Interactive PyACI

Mttrinh — Wed, 02 May 2018 13:31:09 GMT

Hi,

I managed to get it working over at my side following the documentation. Have you set it up correctly? Have you tried changing to another COM port?

Also are you using our latest Mesh SDK v2.0.1?

RE: Interactive PyACI

vijayrakesh — Wed, 02 May 2018 05:41:01 GMT

Hi,

Thanks for the reply, I had gone through the documentation but i didn't find any solution to solve above issue

RE: Interactive PyACI

Mttrinh — Thu, 26 Apr 2018 12:54:56 GMT

Hi,

I suggest you to have a look at the documentation for Interactive PyACI.