Encountered these while trying out Light Switch proxy example in Mesh SDK

RE: Encountered these while trying out Light Switch proxy example in Mesh SDK

FormerMember — Mon, 07 May 2018 13:18:00 GMT

I have updated the answer.

RE: Encountered these while trying out Light Switch proxy example in Mesh SDK

FormerMember — Fri, 04 May 2018 08:40:56 GMT

1. In the Proxy Client example, storing to flash is by default disabled ("PERSISTENT_STORAGE = 0" in preprocessor symbols). To enable flash storing, change it to '1':

2. What you are seeing is a bug in the client/server proxy example. Please have a look at this thread for a workaround.

RE: Encountered these while trying out Light Switch proxy example in Mesh SDK

Sivaguru Ravi — Thu, 03 May 2018 06:24:54 GMT

Hi David,

Sorry for the late response and thank you for the reply.

Client Case:

Yes it is going back to unprovisioned state after reset. And we were able to see the advertisement packet of the client but the provisioner was not able to re-provision/re-include the client back in to the mesh until the Provisioner is reset by clearing all the states.

Server Case:

Yes it is going back to unprovisioned state after reset. And we were able to see the advertisement packet of the client but the provisioner was not able to reprovision/re-include the client back in to the mesh until the server was reset by clearing all the states, which wen done gets provisioned by the provisioner as a new server with a different id than the previous one.

Both client and the server are getting assert when trying to connect via 3^rd party BLE mobile application.

Thnk you

Sivaguru Ravi

RE: Encountered these while trying out Light Switch proxy example in Mesh SDK

David Edwin — Mon, 30 Apr 2018 11:12:23 GMT

I am assuming that you are using the Mesh SDK v2.0.1

Regarding 1. , is the node going back to unprovisioned state after a reset ? get a sniffer trace of the advertising being seen after a power cycle may be helpful.

Regarding 2. Is the proxy client getting the assert or the proxy server ? again get a sniffer trace on the connection and a complete log on the RTT.