Undefined reference to function even though i have included it

RE: Undefined reference to function even though i have included it

Vidar Berg — Tue, 15 May 2018 14:04:14 GMT

You can use the configurations in the TWI and FDS examples to see which defines you need to add/modify in the sdk_config header used by ble_app_uart.

"I tried to copy the whole sdk_config file of the flash_fds onto the ble_app config file but that did not work.."

That will overwrite the existing configuration for the ble_app_uart project.

RE: Undefined reference to function even though i have included it

Cortana — Tue, 15 May 2018 09:51:27 GMT

Ah ok! But what macros should i define in the sdk_config.h file for the ble_app_uart for the twi and flash_fds to work? I tried to copy the whole sdk_config file of the flash_fds onto the ble_app config file but that did not work..

RE: Undefined reference to function even though i have included it

Vidar Berg — Tue, 15 May 2018 08:43:22 GMT

Hi, there's a separate sdk_config.h file for each project which is the one you should modify. I think it might be easier to use the ble_app_uart example as a starting point since has the necessary flags and linker settings to run with the softdevice, then merge fds and twi related code into that project. sdk_config.h for the uart example is located here: \examples\ble_peripheral\ble_app_uart\pca10040\s132\config

RE: Undefined reference to function even though i have included it

Cortana — Tue, 15 May 2018 08:25:28 GMT

My Main.c of the flash_fds example where i have copied the ble_app_uart example because i want it to compile in this project before i include my code. After reading various post on this forum i susepect that i have issues with the sdk_config.h file, in that i have not defined the necessary macros for this to work. Should i do this in the global sdk_config.h file located under config/nrf52832/ ??

/**
 * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA
 * 
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 * 
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 * 
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 * 
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 * 
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 * 
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */
/** @file
 *
 * @defgroup ble_sdk_uart_over_ble_main main.c
 * @{
 * @ingroup  ble_sdk_app_nus_eval
 * @brief    UART over BLE application main file.
 *
 * This file contains the source code for a sample application that uses the Nordic UART service.
 * This application uses the @ref srvlib_conn_params module.
 */


#include <stdint.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf.h"
#include "ble_hci.h"
#include "ble_advdata.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_qwr.h"
#include "app_timer.h"
#include "ble_nus.h"
#include "app_uart.h"
#include "app_util_platform.h"
#include "bsp_btn_ble.h"
#include "nrf_pwr_mgmt.h"

#if defined (UART_PRESENT)
#include "nrf_uart.h"
#endif
#if defined (UARTE_PRESENT)
#include "nrf_uarte.h"
#endif

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"

#define APP_BLE_CONN_CFG_TAG            1                                           /**< A tag identifying the SoftDevice BLE configuration. */

#define DEVICE_NAME                     "Nordic_UART"                               /**< Name of device. Will be included in the advertising data. */
#define NUS_SERVICE_UUID_TYPE           BLE_UUID_TYPE_VENDOR_BEGIN                  /**< UUID type for the Nordic UART Service (vendor specific). */

#define APP_BLE_OBSERVER_PRIO           3                                           /**< Application's BLE observer priority. You shouldn't need to modify this value. */

#define APP_ADV_INTERVAL                64                                          /**< The advertising interval (in units of 0.625 ms. This value corresponds to 40 ms). */

#define APP_ADV_DURATION                18000                                       /**< The advertising duration (180 seconds) in units of 10 milliseconds. */

#define MIN_CONN_INTERVAL               MSEC_TO_UNITS(20, UNIT_1_25_MS)             /**< Minimum acceptable connection interval (20 ms), Connection interval uses 1.25 ms units. */
#define MAX_CONN_INTERVAL               MSEC_TO_UNITS(75, UNIT_1_25_MS)             /**< Maximum acceptable connection interval (75 ms), Connection interval uses 1.25 ms units. */
#define SLAVE_LATENCY                   0                                           /**< Slave latency. */
#define CONN_SUP_TIMEOUT                MSEC_TO_UNITS(4000, UNIT_10_MS)             /**< Connection supervisory timeout (4 seconds), Supervision Timeout uses 10 ms units. */
#define FIRST_CONN_PARAMS_UPDATE_DELAY  APP_TIMER_TICKS(5000)                       /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY   APP_TIMER_TICKS(30000)                      /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAMS_UPDATE_COUNT    3                                           /**< Number of attempts before giving up the connection parameter negotiation. */

#define DEAD_BEEF                       0xDEADBEEF                                  /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */

#define UART_TX_BUF_SIZE                256                                         /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE                256                                         /**< UART RX buffer size. */


BLE_NUS_DEF(m_nus, NRF_SDH_BLE_TOTAL_LINK_COUNT);                                   /**< BLE NUS service instance. */
NRF_BLE_GATT_DEF(m_gatt);                                                           /**< GATT module instance. */
NRF_BLE_QWR_DEF(m_qwr);                                                             /**< Context for the Queued Write module.*/
BLE_ADVERTISING_DEF(m_advertising);                                                 /**< Advertising module instance. */

static uint16_t   m_conn_handle          = BLE_CONN_HANDLE_INVALID;                 /**< Handle of the current connection. */
static uint16_t   m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - 3;            /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
static ble_uuid_t m_adv_uuids[]          =                                          /**< Universally unique service identifier. */
{
    {BLE_UUID_NUS_SERVICE, NUS_SERVICE_UUID_TYPE}
};


/**@brief Function for assert macro callback.
 *
 * @details This function will be called in case of an assert in the SoftDevice.
 *
 * @warning This handler is an example only and does not fit a final product. You need to analyse
 *          how your product is supposed to react in case of Assert.
 * @warning On assert from the SoftDevice, the system can only recover on reset.
 *
 * @param[in] line_num    Line number of the failing ASSERT call.
 * @param[in] p_file_name File name of the failing ASSERT call.
 */
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(DEAD_BEEF, line_num, p_file_name);
}

/**@brief Function for initializing the timer module.
 */
static void timers_init(void)
{
    ret_code_t err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);
}

/**@brief Function for the GAP initialization.
 *
 * @details This function will set up all the necessary GAP (Generic Access Profile) parameters of
 *          the device. It also sets the permissions and appearance.
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *) DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling Queued Write Module errors.
 *
 * @details A pointer to this function will be passed to each service which may need to inform the
 *          application about an error.
 *
 * @param[in]   nrf_error   Error code containing information about what went wrong.
 */
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}


/**@brief Function for handling the data from the Nordic UART Service.
 *
 * @details This function will process the data received from the Nordic UART BLE Service and send
 *          it to the UART module.
 *
 * @param[in] p_evt       Nordic UART Service event.
 */
/**@snippet [Handling the data received over BLE] */
static void nus_data_handler(ble_nus_evt_t * p_evt)
{

    if (p_evt->type == BLE_NUS_EVT_RX_DATA)
    {
        uint32_t err_code;

        NRF_LOG_DEBUG("Received data from BLE NUS. Writing data on UART.");
        NRF_LOG_HEXDUMP_DEBUG(p_evt->params.rx_data.p_data, p_evt->params.rx_data.length);

        for (uint32_t i = 0; i < p_evt->params.rx_data.length; i++)
        {
            do
            {
                err_code = app_uart_put(p_evt->params.rx_data.p_data[i]);
                if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_BUSY))
                {
                    NRF_LOG_ERROR("Failed receiving NUS message. Error 0x%x. ", err_code);
                    APP_ERROR_CHECK(err_code);
                }
            } while (err_code == NRF_ERROR_BUSY);
        }
        if (p_evt->params.rx_data.p_data[p_evt->params.rx_data.length - 1] == '\r')
        {
            while (app_uart_put('\n') == NRF_ERROR_BUSY);
        }
    }

}
/**@snippet [Handling the data received over BLE] */


/**@brief Function for initializing services that will be used by the application.
 */
static void services_init(void)
{
    uint32_t           err_code;
    ble_nus_init_t     nus_init;
    nrf_ble_qwr_init_t qwr_init = {0};

    // Initialize Queued Write Module.
    qwr_init.error_handler = nrf_qwr_error_handler;

    err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init);
    APP_ERROR_CHECK(err_code);

    // Initialize NUS.
    memset(&nus_init, 0, sizeof(nus_init));

    nus_init.data_handler = nus_data_handler;

    err_code = ble_nus_init(&m_nus, &nus_init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling an event from the Connection Parameters Module.
 *
 * @details This function will be called for all events in the Connection Parameters Module
 *          which are passed to the application.
 *
 * @note All this function does is to disconnect. This could have been done by simply setting
 *       the disconnect_on_fail config parameter, but instead we use the event handler
 *       mechanism to demonstrate its use.
 *
 * @param[in] p_evt  Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    uint32_t err_code;

    if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
        APP_ERROR_CHECK(err_code);
    }
}


/**@brief Function for handling errors from the Connection Parameters module.
 *
 * @param[in] nrf_error  Error code containing information about what went wrong.
 */
static void conn_params_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}


/**@brief Function for initializing the Connection Parameters module.
 */
static void conn_params_init(void)
{
    uint32_t               err_code;
    ble_conn_params_init_t cp_init;

    memset(&cp_init, 0, sizeof(cp_init));

    cp_init.p_conn_params                  = NULL;
    cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
    cp_init.next_conn_params_update_delay  = NEXT_CONN_PARAMS_UPDATE_DELAY;
    cp_init.max_conn_params_update_count   = MAX_CONN_PARAMS_UPDATE_COUNT;
    cp_init.start_on_notify_cccd_handle    = BLE_GATT_HANDLE_INVALID;
    cp_init.disconnect_on_fail             = false;
    cp_init.evt_handler                    = on_conn_params_evt;
    cp_init.error_handler                  = conn_params_error_handler;

    err_code = ble_conn_params_init(&cp_init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for putting the chip into sleep mode.
 *
 * @note This function will not return.
 */
static void sleep_mode_enter(void)
{
    uint32_t err_code = bsp_indication_set(BSP_INDICATE_IDLE);
    APP_ERROR_CHECK(err_code);

    // Prepare wakeup buttons.
    err_code = bsp_btn_ble_sleep_mode_prepare();
    APP_ERROR_CHECK(err_code);

    // Go to system-off mode (this function will not return; wakeup will cause a reset).
    err_code = sd_power_system_off();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling advertising events.
 *
 * @details This function will be called for advertising events which are passed to the application.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    uint32_t err_code;

    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_FAST:
            err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
            APP_ERROR_CHECK(err_code);
            break;
        case BLE_ADV_EVT_IDLE:
            sleep_mode_enter();
            break;
        default:
            break;
    }
}


/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.
 */
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    uint32_t err_code;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("Connected");
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);
            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            NRF_LOG_INFO("Disconnected");
            // LED indication will be changed when advertising starts.
            m_conn_handle = BLE_CONN_HANDLE_INVALID;
            break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            // Pairing not supported
            err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_SYS_ATTR_MISSING:
            // No system attributes have been stored.
            err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}


/**@brief Function for the SoftDevice initialization.
 *
 * @details This function initializes the SoftDevice and the BLE event interrupt.
 */
static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // Configure the BLE stack using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register a handler for BLE events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}


/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
    if ((m_conn_handle == p_evt->conn_handle) && (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED))
    {
        m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
        NRF_LOG_INFO("Data len is set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
    }
    NRF_LOG_DEBUG("ATT MTU exchange completed. central 0x%x peripheral 0x%x",
                  p_gatt->att_mtu_desired_central,
                  p_gatt->att_mtu_desired_periph);
}


/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
    ret_code_t err_code;

    err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_gatt_att_mtu_periph_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated by button press.
 */
void bsp_event_handler(bsp_event_t event)
{
    uint32_t err_code;
    switch (event)
    {
        case BSP_EVENT_SLEEP:
            sleep_mode_enter();
            break;

        case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

        case BSP_EVENT_WHITELIST_OFF:
            if (m_conn_handle == BLE_CONN_HANDLE_INVALID)
            {
                err_code = ble_advertising_restart_without_whitelist(&m_advertising);
                if (err_code != NRF_ERROR_INVALID_STATE)
                {
                    APP_ERROR_CHECK(err_code);
                }
            }
            break;

        default:
            break;
    }
}


/**@brief   Function for handling app_uart events.
 *
 * @details This function will receive a single character from the app_uart module and append it to
 *          a string. The string will be be sent over BLE when the last character received was a
 *          'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
 */
/**@snippet [Handling the data received over UART] */
void uart_event_handle(app_uart_evt_t * p_event)
{
    static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
    static uint8_t index = 0;
    uint32_t       err_code;

    switch (p_event->evt_type)
    {
        case APP_UART_DATA_READY:
            UNUSED_VARIABLE(app_uart_get(&data_array[index]));
            index++;

            if ((data_array[index - 1] == '\n') || (index >= (m_ble_nus_max_data_len)))
            {
                NRF_LOG_DEBUG("Ready to send data over BLE NUS");
                NRF_LOG_HEXDUMP_DEBUG(data_array, index);

                do
                {
                    uint16_t length = (uint16_t)index;
                    err_code = ble_nus_data_send(&m_nus, data_array, &length, m_conn_handle);
                    if ( (err_code != NRF_ERROR_INVALID_STATE) && (err_code != NRF_ERROR_BUSY) &&
                         (err_code != NRF_ERROR_NOT_FOUND) )
                    {
                        APP_ERROR_CHECK(err_code);
                    }
                } while (err_code == NRF_ERROR_BUSY);

                index = 0;
            }
            break;

        case APP_UART_COMMUNICATION_ERROR:
            APP_ERROR_HANDLER(p_event->data.error_communication);
            break;

        case APP_UART_FIFO_ERROR:
            APP_ERROR_HANDLER(p_event->data.error_code);
            break;

        default:
            break;
    }
}
/**@snippet [Handling the data received over UART] */


/**@brief  Function for initializing the UART module.
 */
/**@snippet [UART Initialization] */
static void uart_init(void)
{
    uint32_t                     err_code;
    app_uart_comm_params_t const comm_params =
    {
        .rx_pin_no    = RX_PIN_NUMBER,
        .tx_pin_no    = TX_PIN_NUMBER,
        .rts_pin_no   = RTS_PIN_NUMBER,
        .cts_pin_no   = CTS_PIN_NUMBER,
        .flow_control = APP_UART_FLOW_CONTROL_DISABLED,
        .use_parity   = false,
#if defined (UART_PRESENT)
        .baud_rate    = NRF_UART_BAUDRATE_115200
#else
        .baud_rate    = NRF_UARTE_BAUDRATE_115200
#endif
    };

    APP_UART_FIFO_INIT(&comm_params,
                       UART_RX_BUF_SIZE,
                       UART_TX_BUF_SIZE,
                       uart_event_handle,
                       APP_IRQ_PRIORITY_LOWEST,
                       err_code);
    APP_ERROR_CHECK(err_code);
}
/**@snippet [UART Initialization] */


/**@brief Function for initializing the Advertising functionality.
 */
static void advertising_init(void)
{
    uint32_t               err_code;
    ble_advertising_init_t init;

    memset(&init, 0, sizeof(init));

    init.advdata.name_type          = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance = false;
    init.advdata.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;

    init.srdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    init.srdata.uuids_complete.p_uuids  = m_adv_uuids;

    init.config.ble_adv_fast_enabled  = true;
    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;
    init.evt_handler = on_adv_evt;

    err_code = ble_advertising_init(&m_advertising, &init);
    APP_ERROR_CHECK(err_code);

    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}


/**@brief Function for initializing buttons and leds.
 *
 * @param[out] p_erase_bonds  Will be true if the clear bonding button was pressed to wake the application up.
 */
static void buttons_leds_init(bool * p_erase_bonds)
{
    bsp_event_t startup_event;

    uint32_t err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
    APP_ERROR_CHECK(err_code);

    err_code = bsp_btn_ble_init(NULL, &startup_event);
    APP_ERROR_CHECK(err_code);

    *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}


/**@brief Function for initializing the nrf log module.
 */
static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}


/**@brief Function for initializing power management.
 */
static void power_management_init(void)
{
    ret_code_t err_code;
    err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling the idle state (main loop).
 *
 * @details If there is no pending log operation, then sleep until next the next event occurs.
 */
static void idle_state_handle(void)
{
    UNUSED_RETURN_VALUE(NRF_LOG_PROCESS());
    nrf_pwr_mgmt_run();
}


/**@brief Function for starting advertising.
 */
static void advertising_start(void)
{
    uint32_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);
}


/**@brief Application main function.
 */
int main(void)
{
    bool erase_bonds;

    // Initialize.

    uart_init();
    log_init();
    timers_init();
    buttons_leds_init(&erase_bonds);
    power_management_init();
    ble_stack_init();
    gap_params_init();
    gatt_init();
    services_init();
    advertising_init();
    conn_params_init();

    // Start execution.
    printf("\r\nUART started.\r\n");
    NRF_LOG_INFO("Debug logging for UART over RTT started.");
    advertising_start();

    // Enter main loop.
    for (;;)
    {
        idle_state_handle();
    }
}


/**
 * @}
 */

RE: Undefined reference to function even though i have included it

Cortana — Tue, 15 May 2018 07:19:01 GMT

PROJECT_NAME     := flash_fds_example_s132_pca10040
TARGETS          := nrf52832_xxaa
OUTPUT_DIRECTORY := _build

SDK_ROOT := ../../../../../..
PROJ_DIR := ../../..

$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \
  LINKER_SCRIPT  := flash_fds_example_gcc_nrf52.ld

# Source files common to all targets
SRC_FILES += \
  $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \
  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \
  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_uart.c \
  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \
  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \
  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \
  $(SDK_ROOT)/components/boards/boards.c \
  $(SDK_ROOT)/components/libraries/util/app_error.c \
  $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \
  $(SDK_ROOT)/components/libraries/util/app_error_weak.c \
  $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \
  $(SDK_ROOT)/components/libraries/timer/app_timer.c \
  $(SDK_ROOT)/components/libraries/util/app_util_platform.c \
  $(SDK_ROOT)/components/libraries/crc16/crc16.c \
  $(SDK_ROOT)/components/libraries/fds/fds.c \
  $(SDK_ROOT)/external/fnmatch/fnmatch.c \
  $(SDK_ROOT)/components/libraries/util/nrf_assert.c \
  $(SDK_ROOT)/components/libraries/atomic_fifo/nrf_atfifo.c \
  $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \
  $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \
  $(SDK_ROOT)/components/libraries/cli/nrf_cli.c \
  $(SDK_ROOT)/components/libraries/cli/uart/nrf_cli_uart.c \
  $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \
  $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \
  $(SDK_ROOT)/components/libraries/fstorage/nrf_fstorage.c \
  $(SDK_ROOT)/components/libraries/fstorage/nrf_fstorage_sd.c \
  $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \
  $(SDK_ROOT)/components/libraries/pwr_mgmt/nrf_pwr_mgmt.c \
  $(SDK_ROOT)/components/libraries/queue/nrf_queue.c \
  $(SDK_ROOT)/components/libraries/experimental_ringbuf/nrf_ringbuf.c \
  $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \
  $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \
  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_uart.c \
  $(SDK_ROOT)/modules/nrfx/drivers/src/prs/nrfx_prs.c \
  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uart.c \
  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_uarte.c \
  $(PROJ_DIR)/cli.c \
  $(PROJ_DIR)/main.c \
  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
  $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \
  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ble.c \
  $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \
  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
  $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \
  $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \
  $(SDK_ROOT)/components/libraries/button/app_button.c \
  $(SDK_ROOT)/components/libraries/fifo/app_fifo.c \
  $(SDK_ROOT)/components/libraries/uart/app_uart_fifo.c \
  $(SDK_ROOT)/components/libraries/uart/app_uart.c \
  $(SDK_ROOT)/components/libraries/hardfault/hardfault_implementation.c \
  $(SDK_ROOT)/components/libraries/atomic_flags/nrf_atflags.c \
  $(SDK_ROOT)/components/libraries/uart/retarget.c \
  $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \
  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \
  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \
  $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \
  $(SDK_ROOT)/components/libraries/bsp/bsp.c \
  $(SDK_ROOT)/components/libraries/bsp/bsp_btn_ble.c \
  $(SDK_ROOT)/components/ble/common/ble_advdata.c \
  $(SDK_ROOT)/components/ble/ble_advertising/ble_advertising.c \
  $(SDK_ROOT)/components/ble/common/ble_conn_params.c \
  $(SDK_ROOT)/components/ble/common/ble_conn_state.c \
  $(SDK_ROOT)/components/ble/ble_link_ctx_manager/ble_link_ctx_manager.c \
  $(SDK_ROOT)/components/ble/common/ble_srv_common.c \
  $(SDK_ROOT)/components/ble/nrf_ble_gatt/nrf_ble_gatt.c \
  $(SDK_ROOT)/components/ble/nrf_ble_qwr/nrf_ble_qwr.c \
  $(SDK_ROOT)/components/ble/ble_services/ble_nus/ble_nus.c \

  








  


# Include folders common to all targets
INC_FOLDERS += \
  $(SDK_ROOT)/components/libraries/cli \
  $(SDK_ROOT)/modules/nrfx/mdk \
  $(SDK_ROOT)/components/libraries/scheduler \
  $(SDK_ROOT)/modules/nrfx \
  $(SDK_ROOT)/components/libraries/experimental_log \
  $(SDK_ROOT)/components/toolchain/cmsis/include \
  $(SDK_ROOT)/components/libraries/queue \
  $(SDK_ROOT)/components/libraries/pwr_mgmt \
  $(SDK_ROOT)/components/libraries/strerror \
  $(SDK_ROOT)/components/libraries/crc16 \
  $(SDK_ROOT)/components/libraries/timer \
  $(SDK_ROOT)/components/softdevice/s132/headers/nrf52 \
  $(SDK_ROOT)/components/libraries/util \
  ../config \
  $(SDK_ROOT)/components/libraries/balloc \
  $(SDK_ROOT)/components/libraries/cli/uart \
  $(SDK_ROOT)/components/libraries/fstorage \
  $(SDK_ROOT)/components/libraries/experimental_section_vars \
  $(SDK_ROOT)/components/softdevice/s132/headers \
  $(SDK_ROOT)/integration/nrfx/legacy \
  $(SDK_ROOT)/components/libraries/mutex \
  $(SDK_ROOT)/external/fnmatch \
  $(SDK_ROOT)/components/libraries/experimental_log/src \
  $(SDK_ROOT)/components/libraries/delay \
  $(SDK_ROOT)/integration/nrfx \
  $(SDK_ROOT)/components/libraries/atomic_fifo \
  $(SDK_ROOT)/components/libraries/experimental_ringbuf \
  $(SDK_ROOT)/components/libraries/atomic \
  $(SDK_ROOT)/components/boards \
  $(SDK_ROOT)/components/libraries/experimental_memobj \
  $(SDK_ROOT)/components/libraries/fds \
  $(SDK_ROOT)/components/softdevice/common \
  $(SDK_ROOT)/modules/nrfx/drivers/include \
  $(SDK_ROOT)/modules/nrfx/hal \
  $(SDK_ROOT)/external/fprintf \
  $(SDK_ROOT)/components/libraries/bsp \
  $(SDK_ROOT)/components/libraries/button \
  $(PROJ_DIR) \
  $(SDK_ROOT)/components/libraries/uart \
  $(SDK_ROOT)/integration/nrfx/legacy \
  $(SDK_ROOT)/components/nfc/ndef/generic/message \
  $(SDK_ROOT)/components/nfc/t2t_lib \
  $(SDK_ROOT)/components/nfc/t4t_parser/hl_detection_procedure \
  $(SDK_ROOT)/components/ble/ble_services/ble_ancs_c \
  $(SDK_ROOT)/components/ble/ble_services/ble_ias_c \
  $(SDK_ROOT)/components/libraries/pwm \
  $(SDK_ROOT)/components/libraries/usbd/class/cdc/acm \
  $(SDK_ROOT)/components/libraries/usbd/class/hid/generic \
  $(SDK_ROOT)/components/libraries/usbd/class/msc \
  $(SDK_ROOT)/components/libraries/usbd/class/hid \
  $(SDK_ROOT)/components/ble/ble_services/ble_gls \
  $(SDK_ROOT)/components/nfc/ndef/text \
  $(SDK_ROOT)/components/libraries/gfx \
  $(SDK_ROOT)/components/libraries/bootloader/ble_dfu \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/common \
  $(SDK_ROOT)/components/libraries/fifo \
  $(SDK_ROOT)/components/nfc/t4t_parser/cc_file \
  $(SDK_ROOT)/components/nfc/ndef/generic/record \
  $(SDK_ROOT)/components/ble/ble_advertising \
  $(SDK_ROOT)/components/ble/ble_services/ble_bas_c \
  $(SDK_ROOT)/components/libraries/experimental_task_manager \
  $(SDK_ROOT)/components/ble/ble_services/ble_hrs_c \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/le_oob_rec \
  $(SDK_ROOT)/components/ble/ble_dtm \
  $(SDK_ROOT)/components/ble/ble_services/ble_rscs_c \
  $(SDK_ROOT)/components/ble/common \
  $(SDK_ROOT)/components/ble/ble_services/ble_lls \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/ac_rec \
  $(SDK_ROOT)/components/ble/ble_services/ble_bas \
  $(SDK_ROOT)/components/ble/ble_services/ble_ans_c \
  $(SDK_ROOT)/components/libraries/slip \
  $(SDK_ROOT)/components/libraries/experimental_mpu \
  $(SDK_ROOT)/components/libraries/mem_manager \
  $(SDK_ROOT)/components/libraries/csense_drv \
  $(SDK_ROOT)/components/ble/ble_services/ble_nus_c \
  $(SDK_ROOT)/components/libraries/usbd/config \
  $(SDK_ROOT)/components/softdevice/common \
  $(SDK_ROOT)/components/ble/ble_services/ble_ias \
  $(SDK_ROOT)/components/libraries/usbd/class/hid/mouse \
  $(SDK_ROOT)/components/libraries/low_power_pwm \
  $(SDK_ROOT)/components/ble/ble_services/ble_dfu \
  $(SDK_ROOT)/components/nfc/ndef/conn_hand_parser/ble_oob_advdata_parser \
  $(SDK_ROOT)/components \
  $(SDK_ROOT)/components/ble/ble_services/ble_lbs \
  $(SDK_ROOT)/components/ble/ble_services/ble_hts \
  $(SDK_ROOT)/components/ble/ble_services/ble_cts_c \
  $(SDK_ROOT)/components/nfc/t4t_parser/apdu \
  $(SDK_ROOT)/components/libraries/usbd/class/cdc \
  $(SDK_ROOT)/components/libraries/csense \
  $(SDK_ROOT)/components/libraries/ecc \
  $(SDK_ROOT)/components/libraries/hardfault \
  $(SDK_ROOT)/components/ble/ble_services/ble_cscs \
  $(SDK_ROOT)/components/libraries/hci \
  $(SDK_ROOT)/components/libraries/usbd/class/hid/kbd \
  $(SDK_ROOT)/components/nfc/t4t_parser/tlv \
  $(SDK_ROOT)/components/libraries/sortlist \
  $(SDK_ROOT)/components/libraries/spi_mngr \
  $(SDK_ROOT)/components/libraries/experimental_stack_guard \
  $(SDK_ROOT)/components/libraries/led_softblink \
  $(SDK_ROOT)/components/nfc/ndef/conn_hand_parser \
  $(SDK_ROOT)/components/libraries/sdcard \
  $(SDK_ROOT)/components/nfc/ndef/parser/record \
  $(SDK_ROOT)/components/ble/ble_link_ctx_manager \
  $(SDK_ROOT)/components/nfc/ndef/conn_hand_parser/le_oob_rec_parser \
  $(SDK_ROOT)/components/ble/ble_services/ble_nus \
  $(SDK_ROOT)/components/libraries/twi_mngr \
  $(SDK_ROOT)/components/ble/ble_services/ble_hids \
  $(SDK_ROOT)/components/libraries/crc32 \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/ble_oob_advdata \
  $(SDK_ROOT)/components/nfc/t2t_parser \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/ble_pair_msg \
  $(SDK_ROOT)/components/libraries/usbd/class/audio \
  $(SDK_ROOT)/components/nfc/t4t_lib/hal_t4t \
  $(SDK_ROOT)/components/nfc/t4t_lib \
  $(SDK_ROOT)/components/ble/peer_manager \
  $(SDK_ROOT)/components/drivers_nrf/usbd \
  $(SDK_ROOT)/components/ble/ble_services/ble_tps \
  $(SDK_ROOT)/components/nfc/ndef/parser/message \
  $(SDK_ROOT)/components/ble/ble_services/ble_dis \
  $(SDK_ROOT)/components/nfc/ndef/uri \
  $(SDK_ROOT)/components/ble/nrf_ble_gatt \
  $(SDK_ROOT)/components/ble/nrf_ble_qwr \
  $(SDK_ROOT)/components/libraries/gpiote \
  $(SDK_ROOT)/components/libraries/twi_sensor \
  $(SDK_ROOT)/components/libraries/usbd \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/ep_oob_rec  \
  $(SDK_ROOT)/components/ble/ble_services/ble_lbs_c \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/ble_pair_lib \
  $(SDK_ROOT)/components/libraries/crypto \
  $(SDK_ROOT)/components/ble/ble_racp \
  $(SDK_ROOT)/components/nfc/ndef/launchapp \
  $(SDK_ROOT)/components/libraries/atomic_flags \
  $(SDK_ROOT)/components/ble/ble_services/ble_rscs \
  $(SDK_ROOT)/components/nfc/ndef/connection_handover/hs_rec \
  $(SDK_ROOT)/components/nfc/t2t_lib/hal_t2t \
  $(SDK_ROOT)/components/nfc/ndef/conn_hand_parser/ac_rec_parser \
  $(SDK_ROOT)/components/ble/ble_services/ble_hrs \
  $(SDK_ROOT)/components/libraries/uart \
  $(SDK_ROOT)/components/ble/nrf_ble_gatt \
  $(SDK_ROOT)/components/ble/ble_services/ble_nus \






# Libraries common to all targets
LIB_FILES += \

# Optimization flags
OPT = -O3 -g3
# Uncomment the line below to enable link time optimization
#OPT += -flto

# C flags common to all targets
CFLAGS += $(OPT)
CFLAGS += -DBOARD_PCA10040
CFLAGS += -DCONFIG_GPIO_AS_PINRESET
CFLAGS += -DFLOAT_ABI_HARD
CFLAGS += -DNRF52
CFLAGS += -DNRF52832_XXAA
CFLAGS += -DNRF52_PAN_74
CFLAGS += -DNRF_SD_BLE_API_VERSION=6
CFLAGS += -DS132
CFLAGS += -DSOFTDEVICE_PRESENT
CFLAGS += -DSWI_DISABLE0
CFLAGS += -mcpu=cortex-m4
CFLAGS += -mthumb -mabi=aapcs
CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
# keep every function in a separate section, this allows linker to discard unused ones
CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing
CFLAGS += -fno-builtin -fshort-enums

# C++ flags common to all targets
CXXFLAGS += $(OPT)

# Assembler flags common to all targets
ASMFLAGS += -g3
ASMFLAGS += -mcpu=cortex-m4
ASMFLAGS += -mthumb -mabi=aapcs
ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
ASMFLAGS += -DBOARD_PCA10040
ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET
ASMFLAGS += -DFLOAT_ABI_HARD
ASMFLAGS += -DNRF52
ASMFLAGS += -DNRF52832_XXAA
ASMFLAGS += -DNRF52_PAN_74
ASMFLAGS += -DNRF_SD_BLE_API_VERSION=6
ASMFLAGS += -DS132
ASMFLAGS += -DSOFTDEVICE_PRESENT
ASMFLAGS += -DSWI_DISABLE0

# Linker flags
LDFLAGS += $(OPT)
LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT)
LDFLAGS += -mcpu=cortex-m4
LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
# let linker dump unused sections
LDFLAGS += -Wl,--gc-sections
# use newlib in nano version
LDFLAGS += --specs=nano.specs

nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=512
nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=16384
nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=512
nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=16384

# Add standard libraries at the very end of the linker input, after all objects
# that may need symbols provided by these libraries.
LIB_FILES += -lc -lnosys -lm


.PHONY: default help

# Default target - first one defined
default: nrf52832_xxaa

# Print all targets that can be built
help:
	@echo following targets are available:
	@echo		nrf52832_xxaa
	@echo		flash_softdevice
	@echo		sdk_config - starting external tool for editing sdk_config.h
	@echo		flash      - flashing binary

TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc


include $(TEMPLATE_PATH)/Makefile.common

$(foreach target, $(TARGETS), $(call define_target, $(target)))

.PHONY: flash flash_softdevice erase

# Flash the program
flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex
	@echo Flashing: $<
	nrfjprog -f nrf52 --program $< --sectorerase
	nrfjprog -f nrf52 --reset

# Flash softdevice
flash_softdevice:
	@echo Flashing: s132_nrf52_6.0.0_softdevice.hex
	nrfjprog -f nrf52 --program $(SDK_ROOT)/components/softdevice/s132/hex/s132_nrf52_6.0.0_softdevice.hex --sectorerase
	nrfjprog -f nrf52 --reset

erase:
	nrfjprog -f nrf52 --eraseall

SDK_CONFIG_FILE := ../config/sdk_config.h
CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar
sdk_config:
	java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE)

RE: Undefined reference to function even though i have included it

Cortana — Tue, 15 May 2018 07:17:29 GMT

One of the functions that are undefined is the functions app_uart_get and app_uart_put from app_uart.h