Provisioning problem when want to use more than 1 client node

RE: Provisioning problem when want to use more than 1 client node

vishal — Thu, 24 May 2018 08:58:10 GMT

Thanks for your response,

But due to not support low power node in Nordic mesh system yet and also not suitable for large amount of data traffic mesh system, we stop here because we need to sensor node battery power device. Now from suggestion of one Nordic support person we move to use regular ble connection using central and peripheral example for implementing our application.

Really thank you so much for your great support...!!!

RE: Provisioning problem when want to use more than 1 client node

Bjørn Kvaale — Tue, 22 May 2018 14:12:05 GMT

If you take a look at check_network_state, you notice that when the client is provisioned, it's device uuid is checked (see m_client_node_uuid). You will most likely need to add another client uuid for the second client node that you want to add. Once you have done that, you should be able to provision the other client node too.

RE: Provisioning problem when want to use more than 1 client node

vishal — Tue, 22 May 2018 07:10:25 GMT

Waiting for response..!!