provisionning using nRF Mesh

RE: provisionning using nRF Mesh

Mostafa Berg — Mon, 02 Jul 2018 10:34:55 GMT

Yes, that's correct, I'm not sure why the client demo is setup that way but all models needs to be configured for it to work :)

glad things worked out !, please remember to mark the answer as accepted so this gets updated for future users, and if you have any questions don't hesitate opening a new ticket ! :)

RE: provisionning using nRF Mesh

Mickael Marty — Fri, 29 Jun 2018 12:50:27 GMT

Hello Mostafa,

Thanks for your answer, I just saw it and tried.

I am using the App v1.01, build 7.

I want to provision and use the simple light example from sdk 2.0.1.

I provisioned and bound the AppKey without problem.

i did two tests: I set publication adress of my client to my server's unicast and i tried again with a group address

On the server side, the publication address is my client unicast and the subscription one is the same group address.

I tried setting the leds on and off from the client but i get: "Ignored. Node is not configured." when pressing the buttons.

What am I doing wrong?

Also, does your step 6 means that I can't send any message to unicast address to control a single element? or is it implementation specific?

Thanks in advance

Mickael

edit: My bad, the example just required all the client to be configured to work.It's ok now.

RE: provisionning using nRF Mesh

Mostafa Berg — Tue, 19 Jun 2018 11:42:18 GMT

Can you please open up a new ticket since you're having a different question? make sure to mention me there so I can get back to you as soon as I can :)

RE: provisionning using nRF Mesh

Mostafa Berg — Tue, 19 Jun 2018 11:41:47 GMT

We can't resymbolicate since we don't have the .dSYM file for your specific build :) but thanks for sharing :)

please see my answer below and let me know if it works out for you

RE: provisionning using nRF Mesh

Mostafa Berg — Tue, 19 Jun 2018 11:40:30 GMT

Hi Mickael, thanks for testing nRF Mesh for iOS!

First of all, let's try things out to make sure we're on the same page,

Download the latest version from the app store (v1.0)
Provision your node (needs to have a GenericOnOff Server model so you can test the LED)
Go to the GenericOnOff Model's view
Bind the app key
Press the toggle switch and observe the LED turning On/Off (This will use the unicast address of the model's element)
Add a subscription group address, let's say `0xCEEF`, note that this will support only Group addresses, not the Unicast.
Press the toggle switch and observe the LED turning OnOff/ (This will now be using the group address instead)

Repeat all of the above for as many nodes as you like, as long as you set the same subscription address `0xCEEF` in that case, all the nodes will turn on/off when you toggle the switch.

Note: Node control through the app will only work with the `GenericOnOffServer` model, any other models are not implemented, don't confuse it with `SimpleOnOffServer` if you see it.

RE: provisionning using nRF Mesh

luciom — Thu, 07 Jun 2018 16:35:48 GMT

Hi,

I'm testing the new BLE Mesh app for iOS with nRF52840-Preview-DK boards and Mesh SDK 2.0.1.

The nodes provisioning works well.

How could I test the Simple OnOff Server?

I suppose I can test the board led on/off from my smartphone. Right?

Is it possible to add the bluetooth sig light on/off model?

Thank you.

RE: provisionning using nRF Mesh

Mickael Marty — Mon, 04 Jun 2018 15:26:05 GMT

Hi, thank you for your answer.

i am using an iPhone 7 with iOS11.3.1

and here are some logs:

devzone.nordicsemi.com/.../log-crash-nrf-mesh.7z

RE: provisionning using nRF Mesh

Mttrinh — Mon, 04 Jun 2018 14:08:37 GMT

Hi,

Which iOS version are you using? Are you using iOS 10.x? If yes, this is a known issue and will be fixed soon.

If you are using iOS 11.x, can you upload som crash logs that we can have a look at?

Unfortunately, we do not have any documentation for the app in place yet.

RE: provisionning using nRF Mesh

Mickael Marty — Mon, 04 Jun 2018 11:56:57 GMT

An idea anyone? An answer would be highly apreciated. thanks!