debug OUT

RE: debug OUT

Hu Lao — Thu, 15 Oct 2020 13:52:45 GMT

In my case (perhaps him as well), I would like to program a custom nRF52-based board using the DK + TC2050. Up today, it seem there is not "ready to use" cable.

Edit: it seem the series CTX could be an option to connect the Debug OUT to a Tag-Connect connector custom device (or nRF52840 dongle), as mentioned here

RE: debug OUT

Bjørn Kvaale — Wed, 25 Jul 2018 14:25:20 GMT

May I ask why you want to program the graviton dongle via the debug out port? Just curious 🙂

You probably already know this, but you can program the dongle via nrfutil or the nrf programmer app in nrf connect for pc (take a look at Section 5 of the dongle user guide).

RE: debug OUT

awneil — Mon, 23 Jul 2018 14:39:02 GMT

Have you asked Tag-Connect LLC ?

The debug out connector is the standard ARM Cortex debug connector.

So anything that would convert that to Tag-Connect should do...

RE: debug OUT

Michael — Mon, 23 Jul 2018 13:49:01 GMT

Does anybody make a lead to go from the debug out port (2x5,1.27mm) to the Tag-Connect LLC TC2050-IDC (as found on the new nRF52840 dongle)???

RE: debug OUT

Bjørn Kvaale — Fri, 01 Jun 2018 06:52:28 GMT

The debug out port is very intuitive to use. If you attach a SWD cable to the debug out port of a nrf5x dev kit & attach the other side of the cable to a Nordich Thingy:52 for example, the nrf5x device will automatically detect this & program the external HW instead of the dev kit.

I believe the same situation applies for the debug in port.