Grouping device in Mesh

RE: Grouping device in Mesh

ajay — Thu, 07 Jun 2018 06:06:20 GMT

I think i go it wrong.

Either Simple_on_off_client_GroupAdderss_Set, or config_client_model_subscription_overwrite , it will still need to wait the response code from the server.

Therefore, i cant just put two message to the Mesh Stack, and let it go.

I revised my Android UI app, such that it will group one device at a time, for each BLE command sent.

RE: Grouping device in Mesh

Bjørn Kvaale — Mon, 04 Jun 2018 11:21:35 GMT

Send me a private message with your country location & I will put you in contact with your local regional sales manager. He should be able to help you further.

RE: Grouping device in Mesh

Bjørn Kvaale — Mon, 04 Jun 2018 11:20:45 GMT

That could be a good idea, yes. I would try that.

RE: Grouping device in Mesh

ajay — Mon, 04 Jun 2018 09:55:07 GMT

I believe the problem is the Mesh need to wait for ack of the config_client_model_subscription_overwrite message.

While my thread is still not release, and already want to fire another config_client_model_subscription_overwrite request.

So, i should build up some callback issue.

May be i should consider to build a function like simple_on_off_client_GroupAdderss_Set().

RE: Grouping device in Mesh

ajay — Mon, 04 Jun 2018 09:22:42 GMT

And morover, i believe the firmware on the device should be altered. So, that that moment , i may still have the same problem as per described

RE: Grouping device in Mesh

ajay — Mon, 04 Jun 2018 09:21:24 GMT

Then do we have schedule on that?

RE: Grouping device in Mesh

Bjørn Kvaale — Mon, 04 Jun 2018 09:20:28 GMT

Once the Android app is out on the play store, it should be possible to download the source code on the Nordic Semiconductor github code. Then, you can use that app as a groundwork for writing your own mesh app.

RE: Grouping device in Mesh

ajay — Mon, 04 Jun 2018 08:38:57 GMT

And i would like to do the UI on my own. That's why ..

RE: Grouping device in Mesh

ajay — Mon, 04 Jun 2018 08:25:53 GMT

no, i am doing the android app on my own..

RE: Grouping device in Mesh

Bjørn Kvaale — Mon, 04 Jun 2018 07:41:57 GMT

If you have an iPhone, I would check out the nrf mesh app on the app store. This app should let you update the group subscriptions. If you do not have an iPhone, the Android version should be coming to the Google Play Store very soon.

RE: Grouping device in Mesh

ajay — Mon, 04 Jun 2018 05:35:08 GMT

Yes, the provision is already done.

What i want to do is just update the group subscriptions via a BLE command from Android app

On the Bluetooth Mesh Side.

I already have a device as a client (As a provisioner, and manager the group info of the Mesh network.)

and 3Servers already provisioned with the client. They by default will be assigned to the subscription address of 0xCAFE.

Now, what i want to is, when the client receive an BLE command, then it will assigned the servers to the Group accordingly.

RE: Grouping device in Mesh

Bjørn Kvaale — Fri, 01 Jun 2018 12:25:16 GMT

How are you provisioning the mesh nodes? Do you just want to update the group subscriptions via the Android app or do the whole provisioning via the Android app?