Bootloader assert error using gcc in SD v7

RE: Bootloader assert error using gcc in SD v7

Petter Myhre — Tue, 23 Sep 2014 14:35:52 GMT

Thank you for answering your own question.

RE: Bootloader assert error using gcc in SD v7

Cyril Hruscak — Wed, 27 Aug 2014 14:56:10 GMT

OK, the assert problem was wrong setting of bootloader address in UICR register (type error in the code).

RE: Bootloader assert error using gcc in SD v7

Nikita — Wed, 27 Aug 2014 13:44:54 GMT

Maybe it's not 190 line number of main.c but src\host_core.c file? And this assert not from sd_ble_enable()? Upload your project, I'll try it on my board, maybe you add some more changes.

RE: Bootloader assert error using gcc in SD v7

Cyril Hruscak — Wed, 27 Aug 2014 10:22:50 GMT

I'm using latest S110 SDv7 and the same project you wrote. The only difference is I have custom board. But normal application works fine with SDv7. And the bootloader worked with previous SDv6 without problems.

RE: Bootloader assert error using gcc in SD v7

Nikita — Wed, 27 Aug 2014 08:20:09 GMT

Are you sure you are using lastest S110 SDv7 and not SDv7 alpha? And what board do you use? I just tried nRF51 SDK_v6.0.0.43681\Nordic\nrf51822\Board\nrf6310\device_firmware_updates\bootloader project with removed LED_2 and LED7 and changed button 7 to button 0 on my PCA10001 board and it works fine.

RE: Bootloader assert error using gcc in SD v7

Cyril Hruscak — Wed, 27 Aug 2014 06:06:06 GMT

I assume host_core.c is part of the SoftDevice, not SDK.

RE: Bootloader assert error using gcc in SD v7

Nikita — Tue, 26 Aug 2014 16:15:48 GMT

What project are you using? I don't see any host_core.c it SDK.