Meanwhile used BLE and 2.4G in nRF52810

RE: Meanwhile used BLE and 2.4G in nRF52810

tony55723 — Thu, 02 Aug 2018 07:06:17 GMT

OK , Let me take look at these examples

Then if there is no understanding of it , i'll come to learn more from you

Thank you so mush

RE: Meanwhile used BLE and 2.4G in nRF52810

tony55723 — Thu, 02 Aug 2018 07:05:01 GMT

OK , Let me take look at these examples

Then if there is no understanding of it , i'll come to learn more from you

Thank you so mush

RE: Meanwhile used BLE and 2.4G in nRF52810

tony55723 — Thu, 02 Aug 2018 07:04:05 GMT

OK , Let me take look at these examples

Then if there is no understanding of it , i'll come to learn more from you

Thank you so mush

RE: Meanwhile used BLE and 2.4G in nRF52810

Martin Lesund — Fri, 27 Jul 2018 12:43:25 GMT

Hi Tony,

Sorry for the delay.

Well this should be possible to achieve.

For your Device A I would recommend using the Relay example as reference and implement a Radio Timeslot (old tutorial on how to set up timeslots) to be able to switch between BLE and 2.4G Proprietary.

We do not have and an already made application, but you should be able to implement this yourself.

Some examples that can be helpful:

-Radio Transmitter example

- Radio Receiver Example

- Multiprotocol Application

RE: Meanwhile used BLE and 2.4G in nRF52810

tony55723 — Tue, 17 Jul 2018 11:57:14 GMT

Yes, understanding is right.

I hope to do three things

【1】DeviceA is a relay and this PCB only one chip（nRF52810）.

【2】2.4G Proprietary & BLE Peripheral can exist at the same time in nRF52810（Because I didn't find an example in SDK）（SDK file ：Only 【proprietary_rf 】 or 【ble_peripheral】）.

【3】At any time , Include DeviceA send data to DeviceB , Mobile phone can't disconnect with the DeviceA

RE: Meanwhile used BLE and 2.4G in nRF52810

Martin Lesund — Tue, 17 Jul 2018 08:27:46 GMT

Hi Tony,

I am not sure I understand your question.

If I understand your application correctly, Device A will Relay the messages from the Smartphone to Device B:

Mobile phone (central) -----BLE-----> DeviceA (relay) --------Proprietary-------> DeviceB (peripheral)

This is possible to achieve.

RE: Meanwhile used BLE and 2.4G in nRF52810

tony55723 — Thu, 12 Jul 2018 01:29:42 GMT

Thank you for your answer，

I looked at 【Relay Example】，this example is BLE Central & Peripheral，

If I know the principle of it，Is it possible to replace （2.4G Proprietary & BLE Peripheral）？

RE: Meanwhile used BLE and 2.4G in nRF52810

tony55723 — Thu, 12 Jul 2018 01:21:42 GMT

Thank you for your answer，But I have some questions.

If I notice the problem of timeslot, can I realize the function of BLE+2.4G?

And mobile phone dosen't disconnect?

RE: Meanwhile used BLE and 2.4G in nRF52810

Martin Lesund — Wed, 11 Jul 2018 12:51:10 GMT

Hello Tony,

I would recommend you to check out the Relay example from the SDK, since it sounds like you could use that as reference.

I would also advise you to read about multiprotocol support if you want to use BLE and another protocol.

RE: Meanwhile used BLE and 2.4G in nRF52810

pkral — Wed, 11 Jul 2018 07:59:12 GMT

To combine any extension or proprietary protocol with BLE, you will have to use timeslot API as explained in marked link. By the way, BLE mesh stack operate using timeslot API as well.