Need exact test steps to configure and provision through nrf mesh app and share its test output...

RE: Need exact test steps to configure and provision through nrf mesh app and share its test output...

Hung Bui — Thu, 20 Sep 2018 10:28:01 GMT

Hi Prasanna,

After the provisioning you would need to do configuration. The configuration steps is to assign application key and assign publication/subscription address for the nodes. I would suggest you to follow what we did in the video demo that I sent in the last reply.

RE: Need exact test steps to configure and provision through nrf mesh app and share its test output...

KPK — Thu, 20 Sep 2018 09:44:31 GMT

Hi Hung Bui,

Installed nrf mesh app on the android mobile phone, flashed the proxy client hex files on one nRF52840 DK board and proxy server hex files on one nRF52840 DK board.

So with the nrf mesh app i scanned the near by devices(nRF5x Mesh switch and nRF5x Mesh light devices) and then clicked on the each devices to connect and provision. Looks to be provision was successful, which i performed through the mesh application.

After this, when i press switch 1 on the client board, Switch1 of server board is not blinking.

Please let me know the exact test steps to configure and provision the client and server nodes through nRF mesh app on android phone.

Thanks,

Prasanna

RE: Need exact test steps to configure and provision through nrf mesh app and share its test output...

Hung Bui — Fri, 13 Jul 2018 13:36:17 GMT

Hi Prasanna,

The light proxy switch example actually very similar to this demo we have here.

In the demo we simply add a light switch client into the light switch server example. So a node can be both server and client. The main point is to configure the publication address of a client to the same as the subscription address (or the unicast address) of a server. After that you can use the button to send toggle command.

I'm not sure what you mean by "switch roles devices" ?