Extended Advertising Scannable

RE: Extended Advertising Scannable

KEITH — Mon, 10 Sep 2018 20:47:18 GMT

...Actually, sd_ble_gap_adv_set_configure() retuens an error code 7 when using BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_SCANNABLE_UNDIRECTED. I'll create a seperate thread.

RE: Extended Advertising Scannable

KEITH — Mon, 10 Sep 2018 20:19:49 GMT

When I use this code, sd_ble_gap_adv_set_configure is returning error code 7.Any suggestions?

RE: Extended Advertising Scannable

Edvin — Thu, 06 Sep 2018 14:37:55 GMT

Hello, Sorry. I mixed up. Try to define DEBUG in your preprocessor defines, it should give you some more information in the log where the error is coming from.

If it is not the same issue, please create a new ticket describing the issue.

Best regards,

Edvin

RE: Extended Advertising Scannable

lolek — Wed, 05 Sep 2018 13:54:06 GMT

Hi Edvin

I can't reply on your answer but it works perfectly.

you can mark it as an Answer...

thanks for the help,

Lolek

RE: Extended Advertising Scannable

Edvin — Fri, 31 Aug 2018 09:17:42 GMT

No debug information? Do you still have "DEBUG" defined in your preprocessor defines?

Best regards,

Edvin

RE: Extended Advertising Scannable

sathish2307 — Fri, 31 Aug 2018 07:35:59 GMT

hi edvin while uploading using snippet in blinky example its shows fatal error in uart

RE: Extended Advertising Scannable

Edvin — Fri, 24 Aug 2018 07:57:17 GMT

Hello,

I am sorry this took a while.

In the scan response, you shouldn't use any flags.

Try the snippet below for extended_adv()

///////////////////////////MOD//////////////////////////////////////
static void extended_adv()
{
      ret_code_t err_code;
      ble_advdata_t srdata;


      ble_advdata_t const adv_data =
    {
        .name_type          = BLE_ADVDATA_FULL_NAME,
        //.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE,
        .include_appearance = false
    };

      err_code = ble_advdata_encode(&adv_data, m_adv_extended_data.scan_rsp_data.p_data, &m_adv_extended_data.scan_rsp_data.len);
      APP_ERROR_CHECK(err_code);
      
      ble_gap_adv_params_t adv_params;

  // Set advertising parameters.
      memset(&adv_params, 0, sizeof(adv_params));

      adv_params.primary_phy = BLE_GAP_PHY_CODED;
      adv_params.secondary_phy = BLE_GAP_PHY_CODED;
      adv_params.p_peer_addr   = NULL,
      adv_params.duration = APP_ADV_DURATION;
      adv_params.properties.type = BLE_GAP_ADV_TYPE_EXTENDED_NONCONNECTABLE_SCANNABLE_UNDIRECTED;
      adv_params.scan_req_notification = 1;
      adv_params.interval = APP_ADV_INTERVAL;
      adv_params.filter_policy = BLE_GAP_ADV_FP_ANY;
      err_code = sd_ble_gap_adv_set_configure(&m_adv_handle, &m_adv_extended_data, &adv_params);
      if (err_code != NRF_SUCCESS)
        NRF_LOG_INFO("failed at configure");
      APP_ERROR_CHECK(err_code);
      err_code = sd_ble_gap_adv_start(m_adv_handle, APP_BLE_CONN_CFG_TAG);
      APP_ERROR_CHECK(err_code);

}
/////////////////////////MOD END////////////////////////////////////

Best regards,

Edvin

RE: Extended Advertising Scannable

Edvin — Wed, 22 Aug 2018 12:03:34 GMT

Hello,

I see the same behavior as you see.

I have forwarded the issue to the Softdevice team. I am waiting for their response. I will let you know as soon as I hear anything.

Best regards,

Edvin

RE: Extended Advertising Scannable

lolek — Mon, 20 Aug 2018 18:10:55 GMT

Hi Edvin.

Sorry, but I can't share my code in public.

instead, I changed Blinky example to include my advertising routine. it fails on the same place with the same error so I think it's good enough...devzone.nordicsemi.com/.../15787.main.c

RE: Extended Advertising Scannable

Edvin — Mon, 20 Aug 2018 12:10:06 GMT

Hello,

Is it possible to send the entire main.c file, so that I can test this without having to generate my own project? Partly because it is easy, but also partly to avoid any hard-to-discover differences between our projects.

If possible, could you zip the project folder of the project that you use?

Best regards,

Edvin