nrf Connect erases the code when connected to device.

RE: nrf Connect erases the code when connected to device.

Zian — Thu, 23 Aug 2018 11:07:24 GMT

Thank you, this answers my question. Another question is that how do I connect with other blue tooth device such as my phone and computer using nRF Connect. They all listed as unknown and any attempt to connect with them resulted in failure.

RE: nrf Connect erases the code when connected to device.

Marjeris Romero — Thu, 23 Aug 2018 08:30:08 GMT

The nRF Connect Bluetooth low energy app for desktop requires a connection to a local development kit through a serial port connection. So when you connect your board to the PC it will promp a message asking if you want to reprogram your board to setup the serial port connection with the app, and this will erase whatever application that was already programmed on the board. You can then scan for other boards or bluetooth devices and establish a connection with them. If you want to advertise with your local device you can set up advertising by clicking the Device options icon (the gear icon next to the local device name). For more information and step by step guide take a look at the nRF Connect Bluetooh low energy user guide.

- Marjeris

RE: nrf Connect erases the code when connected to device.

Zian — Wed, 22 Aug 2018 19:24:32 GMT

I know there is a nRF Connect mobile app and I have tried it with the ble_blinky, but the issues occur when I use the pc version. Whenever the nRF Connect establishes COM with the DK, it suppresses the application that was already in the board, and the programs stops functioning. For instance, the LED that indicates advertising turns off and the device name can no longer be discovered by other Bluetooth device. (the board can still scan other devices)

RE: nrf Connect erases the code when connected to device.

Marjeris Romero — Tue, 21 Aug 2018 15:30:45 GMT

Hi,

Yes, the ble_blinky example only requires one board. Have you try following this tutorial and connecting the DK with the nRF Connect app in your mobile device? Then try testing with the ble_blinky example instead and tell me if it works.
-Marjeris