HID mouse example getting disconnected from android

RE: HID mouse example getting disconnected from android

hari911 — Fri, 12 Oct 2018 09:19:43 GMT

Hi,

I tried making above mentioned modification, but unfortunately didn't make any difference.

By the way, let me ask you something else. It was regarding HID device descriptor.

I tried using below mentioned descriptor, but it really didn't work as expected.

exports.report = new Uint8Array([
0x05,   0x01,                    // USAGE_PAGE (Generic Desktop)
0x09,   0x05,                    // USAGE (Game Pad) - Hut1_12v2.pdf p28 of 128
0xA1,   0x01,                    // COLLECTION (Application)

0xA1,   0x00,                    //   COLLECTION (Physical)
0x05,   0x09,                    //     USAGE_PAGE (Button)
0x19,   0x01,                    //     USAGE_MINIMUM (Button 1)
0x29,   0x10,                    //     USAGE_MAXIMUM (Button 16)

0x15,   0x00,                    //     LOGICAL_MINIMUM (0)
0x25,   0x01,                    //     LOGICAL_MAXIMUM (1)
0x95,   0x10,                    //     REPORT_COUNT (16)
0x75,   0x01,                    //     REPORT_SIZE (1)

0x81,   0x02,                    //     INPUT (Data,Var,Abs)

0x05,   0x01,                    //     USAGE_PAGE (Generic Desktop)
0x09,   0x30,                    //     USAGE (X)
0x09,   0x31,                    //     USAGE (Y)
0x09,   0x32,                    //     USAGE (Z) - Hut1_12v2.pdf p26 = represents R X-axis
0x09,   0x33,                    //     USAGE (Rx) - Hut1_12v2.pdf p26 = represents R Y-axis

0x15,   0x81,                    //     LOGICAL_MINIMUM (-127)
0x25,   0x7F,                    //     LOGICAL_MAXIMUM (127)
0x75,   0x08,                    //     REPORT_SIZE (8)
0x95,   0x04,                    //     REPORT_COUNT (4)

0x81,   0x06,                    //     INPUT (Data,Var,Abs) - absolute for joysticks ( != rel for mouse )
0xC0,                            //   END_COLLECTION

0xc0 ]                           // END_COLLECTION
);

I couldn't understand below mentioned instruction and its argument

0x81, 0x06, // INPUT (Data,Var,Abs) - absolute for joysticks ( != rel for mouse )

0x81, 0x02, // INPUT (Data,Var,Abs)

If you are familiar with these, kindly help me figure this out. I also looking into hut1_12v2.pdf but so far couldn't find any details regarding the command mentioned.

RE: HID mouse example getting disconnected from android

Kenneth — Mon, 08 Oct 2018 07:58:38 GMT

Hi,

It may be that the accuracy of the lfclk on the peer side is not within specifications.

It is difficult to prove this is the case without a sniffer log, however for test you may try to use:

#define NRF_SDH_CLOCK_LF_ACCURACY 0 // 250ppm

Best regards,
Kenneth

RE: HID mouse example getting disconnected from android

hari911 — Fri, 05 Oct 2018 12:24:27 GMT

Hi,

Am not really sure if this is what you were really looking for, but this is what I could find.

NRF_SDH_CLOCK_LF_ACCURACY 7 // 20 PPM

NRF_SDH_CLOCK_LF_SRC 1 // XTAL

RE: HID mouse example getting disconnected from android

Kenneth — Mon, 24 Sep 2018 18:19:12 GMT

What ppm lfclk tolerance and lfclk source have you enabled the softdevice with?

Kenneth

RE: HID mouse example getting disconnected from android

hari911 — Mon, 24 Sep 2018 16:16:25 GMT

Hi Kenneth,

[quote userid="2111" url="~/f/nordic-q-a/38416/hid-mouse-example-getting-disconnected-from-android/149946"]p_ble_evt->evt.gap_evt.params.disconnected.reason[/quote]

was read as "BLE_HCI_CONNECTION_TIMEOUT" and as I said before, it happens only with the Xiaomi made smart phone.

RE: HID mouse example getting disconnected from android

Kenneth — Mon, 24 Sep 2018 08:12:36 GMT

Hi,

I have not heard of such issue before, so I can only assume it is specifically with a particular smart phone.

What is the disconnect reason when disconnecting (e.g. on BLE_GAP_EVT_DISCONNECTED check p_ble_evt->evt.gap_evt.params.disconnected.reason)?

If it's disconnecting because the peer (smart phone) send a disconnect packet, then it's not much the peripheral device (mouse) can do beside advertise to connect again immediately.

Best regards,
Kenneth

RE: HID mouse example getting disconnected from android

hari911 — Sat, 22 Sep 2018 05:13:25 GMT

Hi,

It seems like a the smart phone did disconnect by itself. I wonder why. I even tested it on PC and everything works smoothly. Is this issues confined specifically with that particular Chinese smart phone?

Kindly help us get to a conclusion since it is not acceptable to get such failures once we enter production phase.

Thanks,

hari

RE: HID mouse example getting disconnected from android

Kenneth — Wed, 12 Sep 2018 12:13:13 GMT

Hello,

What SDK and SD are you using?

Do the HID mouse assert (e.g check app_error_handler())?

What is the disconnect reason when disconnecting (e.g. on BLE_GAP_EVT_DISCONNECTED check p_ble_evt->evt.gap_evt.params.disconnected.reason)?

Do you have an on-air sniffer trace?

Best regards,
Kenneth