Cannot apply the reset pin functionality | Cannot enable RESET button

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

haakonsh — Mon, 08 Oct 2018 08:44:31 GMT

Are you using a Virtual Machine?
Have you physically measured the state of the reset pin, p0.18?
What SDK are you using?
Are you using the production version or the preview version of the DK?
Have you tried nrfjprog -f nrf52 --recover?

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

Navneet — Fri, 05 Oct 2018 18:54:10 GMT

1) I was able to perform pin reset successfully. Reset should start the execution from the beginning after I push the reset button, that is not happening.

2) what kind of detail is needed here? Screenshot? I am not able to see any output like print statements or any of logging.

3) I am not familiar with either of the two terms. But, the device is connected via USB and I use the following command to flash

"BOARD=nrf52dk make flash term".

In the process, JLink connects with the device.

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

haakonsh — Fri, 05 Oct 2018 07:23:43 GMT

"Hey haakonsh I was to reset the device. But neither of them work when reset."
-We need more details.

"My main criteria behind using reset was to enable the pyTerm serial port Input/output. I am not able to see the output always and neither am I able to use shell commands. It works sometimes but inconsistent, so, I was hoping reset would fix the problem."
-We need more details.

"Also, I noticed something weird. If I have 2 devices connected. If I flash twice (at the same time or one after the other) with different PORT numbers ('/dev/ttyACM0', 'dev/ttyACM1'), both times, the same device gets flashed. (the only workaround is to plug and flash one device at a time). In my opinion, The code I am using is irrelevant, because the same thing happened with multiple codes."
-I'll ask around if anyone have experienced a similar issue. Are you able to consistently reproduce this issue?

"Operating System: I am using RIOT OS to flash."
- Are you talking about DFU over USB or Serial, or flashing via SWO?

Are you using a Virtual Machine?

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

Navneet — Fri, 05 Oct 2018 00:55:27 GMT

Hey haakonsh I was to reset the device. But neither of them work when reset.

My main criteria behind using reset was to enable the pyTerm serial port Input/output. I am not able to see the output always and neither am I able to use shell commands. It works sometimes but inconsistent, so, I was hoping reset would fix the problem. (suggested by, https://github.com/RIOT-OS/RIOT/issues/9971).

Also, I noticed something weird. If I have 2 devices connected. If I flash twice (at the same time or one after the other) with different PORT numbers ('/dev/ttyACM0', 'dev/ttyACM1'), both times, the same device gets flashed. (the only workaround is to plug and flash one device at a time). In my opinion, The code I am using is irrelevant, because the same thing happened with multiple codes.

Operating System: I am using RIOT OS to flash.

Thank you.

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

haakonsh — Mon, 01 Oct 2018 11:40:59 GMT

I believe nrf52 is the correct argument with --family. Both --pinreset and --reset should work.

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

Navneet — Thu, 27 Sep 2018 15:43:12 GMT

Okay, and the command I used was correct?

nrfjprog --family nrf52 -p should work?

nrfjprog --family nrf52 -r would work?

and what should be the value for argument --family?

nrf52 was the only thing that worked, nrf52dk threw an error.

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

haakonsh — Thu, 27 Sep 2018 11:19:31 GMT

My nrfjprog is at 9.7.1. I think you need to update.

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

Navneet — Thu, 27 Sep 2018 10:58:13 GMT

I am using the following versions:

nrfjprog version: 8.5.0
JLinkARM.dll version: 6.34g

RE: Cannot apply the reset pin functionality | Cannot enable RESET button

haakonsh — Thu, 27 Sep 2018 07:42:22 GMT

nRF Go Studio is deprecated, it does not support nRF52840, and I think you'll need to download the latest version of nRF5x Command Line Tools.

What version of nrfjprog and J-link driver are you using?