Bluetooth SIG qualification

RE: Bluetooth SIG qualification

run_ar — Tue, 27 Nov 2018 08:19:05 GMT

You should not add LL at this step either. i.e. you cannot qualify LL and Host, those are already qualified so you should not add them to your test plan.

RE: Bluetooth SIG qualification

Karlis — Mon, 26 Nov 2018 13:20:02 GMT

Hi,

If I uncheck LL in Layer selection, then in ICS Consistency Check I get:

"Dependency Invalid

For LE Controller Product Type, the following layers are Mandatory: RFPHY and LL"

Maybe I not clearly understood your suggestion.

RE: Bluetooth SIG qualification

run_ar — Fri, 23 Nov 2018 15:01:11 GMT

Hi,

You are not supposed to add LL and HOST tests to the testplan. It is not possible for you to actually test these. Instead you need to reference our qualified design later on in the process. That is, is your product requires any testing, there is a pane at a later stage where you can do this. If your product do not require any additional testing you reference our qualified design right away.