RE: Rigado-301-A-R module(nrf52832) programming using nrfjprog, JLinkExe on Linux platform.

nileshwaghmare3081 — Wed, 12 Dec 2018 11:58:27 GMT

Thanks Håkon, This worked for me.

RE: Rigado-301-A-R module(nrf52832) programming using nrfjprog, JLinkExe on Linux platform.

Håkon Alseth — Wed, 12 Dec 2018 09:55:15 GMT

Hi,

[quote user=""]1. Procedure to program this module is same as nrf52dk using nrfjprog ?[/quote]

Yes, download and install Jlink, then install command line tools for linux (nrfjprog).

Programming is exactly the same in linux/mac/windows: nrfjprog --program <my file> --sectorerase --reset

[quote user=""][/quote]

2. Can I use Nordic's SDK sample codes as it is or do i have to make any changes ?

first of all I have erased device using nrfjprog -e then merged softdevice .hex and application .hex from SDK12.xx.xx using mergehex and flashed code using nrfjprog but Device is not advertising.

Does your module have an external 32kHz source? if not, you'll need to adjust the lfclk source, as stated in this answer (for SDK 12 or older, SDK v13 and newer has a different configuration via sdk_config.h):

https://devzone.nordicsemi.com/f/nordic-q-a/15363/change-clock-source-nrf52832-app-beacon-example/58701#58701

Could you try this and see if it works?

Kind regards,

Håkon