MESH - cant finish the provision process

RE: MESH - cant finish the provision process

gaman007 — Thu, 29 Aug 2019 09:47:05 GMT

Hey

Can u please confirm whether this issue got resolved or not as i received the same error with my module.

RE: MESH - cant finish the provision process

Joakim Jakobsen — Wed, 13 Feb 2019 11:45:24 GMT

No problem, happy to help!

Please get back to me after trying with the latest release, if you still experience any problems.

Best regards.

RE: MESH - cant finish the provision process

yoavshtainer — Sun, 10 Feb 2019 07:16:04 GMT

I will check the new release, i'm using FANSTEL evaluation board.

I cant run the provisioner and the client in debug mode in the same time (i dont have 2 debuggers), but i will try to check all the information gave me.

thanks.

RE: MESH - cant finish the provision process

Joakim Jakobsen — Wed, 06 Feb 2019 15:19:10 GMT

Hard to tell what the cause might be.

I have done this several times, both using the provisioner example and the nRF Mesh app, without any issues.

[quote userid="73040" url="~/f/nordic-q-a/41696/mesh---cant-finish-the-provision-process/162933"]I'm using nRF5_SDK_15.2.0_9412b96 SDK and mesh SDK V3[/quote]

This is nRF5 SDK for Mesh v.3.0.0 you mean?
If yes, I suggest that you test the latest release.

Are you using one of our DK's to test this or are you using a custom board?

[quote userid="73040" url="~/f/nordic-q-a/41696/mesh---cant-finish-the-provision-process"]I'm using my phone and Nordic app for provision, when i run in debug mode on the client i get this error:[/quote]

So you get an error on the client side when using the nRF Mesh app to provision?
Do you also get the same error when using the provisioner example to provision?

Maybe you can take a look at the guides, and make sure that you are using the examples correctly, using the correct softdevice etc.

Provision, configure, and control bluetooth mesh networks using nRF Mesh.

Building the mesh stack and examples

Running examples

Light switch example

Best regards,
Joakim.

RE: MESH - cant finish the provision process

yoavshtainer — Sun, 27 Jan 2019 07:40:45 GMT

I'm erasing the memory each time before burning, it's cant be that.

anything else?

RE: MESH - cant finish the provision process

Joakim Jakobsen — Fri, 25 Jan 2019 14:30:16 GMT

My mistake.

Please take a look at the suggestion from my Colleague Hung in this thread;

https://devzone.nordicsemi.com/f/nordic-q-a/40829/light_switch_provisioner-assert-problem

Best regards.

RE: MESH - cant finish the provision process

yoavshtainer — Wed, 23 Jan 2019 14:27:31 GMT

I will try to explain, do you see the disassembly window?

in this window in both screenshot you will see the same address, this address is yours fatal error exception address (or something that will make it go to the fatal error). I try more times than i can count to create a network from the provision code and never provision any server.

RE: MESH - cant finish the provision process

Joakim Jakobsen — Tue, 15 Jan 2019 13:54:48 GMT

Hi.

From your screenshot it looks like the provisioning process is successful.

I can't see the error that you mentioned in your question.

Best regards.

RE: MESH - cant finish the provision process

yoavshtainer — Thu, 10 Jan 2019 07:20:45 GMT

No, the provisioning example stuck.

See screenshots below.

RE: MESH - cant finish the provision process

Joakim Jakobsen — Wed, 09 Jan 2019 10:16:30 GMT

[quote user="yoavshtainer"]this don't work with your provision code.[/quote]

What do you mean?
Doesn't the provisioning work using our provisioning example?

RE: MESH - cant finish the provision process

yoavshtainer — Wed, 09 Jan 2019 07:45:24 GMT

It's work like expected after reset. i'm using Red mi note 4.

this don't work with your provision code.

RE: MESH - cant finish the provision process

Joakim Jakobsen — Tue, 08 Jan 2019 11:09:31 GMT

Which phone are you using for the provisioning?

RE: MESH - cant finish the provision process

Joakim Jakobsen — Tue, 08 Jan 2019 11:09:01 GMT

Hi again.

Sorry about the delay.

I've tested this, but I can't seem to be able to reproduce it.

You didn't make any changes to the client example?

[quote user="yoavshtainer"]and if i do a manual reset the node in the network and work fine.[/quote]

So, after the reset the provisioning is successful and the node is connected to the network and behaving as expected?
Are you able to configure the node using the phone after the provisioning and reset?

Best regards,

RE: MESH - cant finish the provision process

yoavshtainer — Mon, 24 Dec 2018 07:26:43 GMT

Hi joakim,

I'm using nRF5_SDK_15.2.0_9412b96 SDK and mesh SDK V3

When i check it more, i see that the unit's get this error, and if i do a manual reset the node in the network and work fine.

So, the problem is only in the provision process according to my understanding.

RE: MESH - cant finish the provision process

Joakim Jakobsen — Wed, 19 Dec 2018 09:58:42 GMT

Hi Yoav.

Which version of the Mesh SDK are you using?

Best regards.