UART sending only one character in mesh beaconing application

RE: UART sending only one character in mesh beaconing application

satish — Tue, 12 Feb 2019 11:29:43 GMT

Hi Jørgen,

It is working now,Thank you very much for the support.

RE: UART sending only one character in mesh beaconing application

Jørgen Holmefjord — Mon, 11 Feb 2019 16:45:47 GMT

I used SES to build. If you have clean SDK, you should not need to make any modifications. Just extract the zip-file I uploaded in examples directory of Mesh SDK, open the nrf52832 project, and build.

RE: UART sending only one character in mesh beaconing application

satish — Mon, 11 Feb 2019 16:42:15 GMT

I have added the UART project( .c and .h files) which are present in the SDK v15.2.0 to the Mesh SDK v3.0 beaconing example and i have included the file paths also in the project,those modifications only i did..

which IDE you are using? Segger embedded studio or any other for building the project

As you suggested i will try to build the project with fresh SDK's by making changes that you have mentioned above.

Thanks.

RE: UART sending only one character in mesh beaconing application

Jørgen Holmefjord — Mon, 11 Feb 2019 16:22:47 GMT

Have you modified anything in the Mesh SDK or SDK v15.2.0? Please try with a fresh extracted copy of both SDK and see if you are able to build the example.

RE: UART sending only one character in mesh beaconing application

satish — Mon, 11 Feb 2019 16:19:09 GMT

Hi Jørgen,

I tried to build that project as it is but i got 18 errors below is the screenshot.

RE: UART sending only one character in mesh beaconing application

Jørgen Holmefjord — Mon, 11 Feb 2019 16:15:05 GMT

I had to add the path to app_uart.h to the project settings (maybe you hardcoded these?), and disable NRFX_UART_ENABLED /NRFX_UARTE_ENABLED in sdk_config.h due to a multiple define of the UART0_UARTE0_IRQ_Handler.

Did you manage to get it working with the project I provided?

RE: UART sending only one character in mesh beaconing application

satish — Mon, 11 Feb 2019 16:01:25 GMT

Hi Jørgen,Thanks for the quick reply.

Yes,I'm using segger embedded studio for building the project,what are the errors that you have fixed but for me it compiled without any errors.

Once again thanks for your support.

RE: UART sending only one character in mesh beaconing application

Jørgen Holmefjord — Mon, 11 Feb 2019 15:31:14 GMT

Are you building using the Segger project? I had to fix some errors to make it compile, but after that I'm not able to reproduce your issue.

I attached the fixed project: devzone.nordicsemi.com/.../beaconing_5F00_uart.zip

RE: UART sending only one character in mesh beaconing application

satish — Mon, 11 Feb 2019 10:21:02 GMT

Hi Jørgen

1. HWFC is disabled in my application and terminal settings also same as in the application like baud rate ..etc

2. Other than UART beaconing application functioning correctly like without UART code.

have look at my code,below i'm attaching the mesh sdk's beaconing application integrated with nrf5 sdk 15.2 UART module

devzone.nordicsemi.com/.../beaconing.rar

RE: UART sending only one character in mesh beaconing application

Jørgen Holmefjord — Mon, 11 Feb 2019 09:54:57 GMT

Hi,

Is HWFC enabled in your application, and do the settings in the terminal correspond to that of the application?
Is the application working as expected in other aspects than UART? If no, have you tried debugging the application to see if there are any error codes causing it to fail?

Best regards,
Jørgen

RE: UART sending only one character in mesh beaconing application

satish — Mon, 11 Feb 2019 07:35:29 GMT

please anyone tell me why it is behaving like that?