To display uuid, major,minor values and the battery life using Ble_app_beacon example

RE: To display uuid, major,minor values and the battery life using Ble_app_beacon example

AmbystomaLabs — Fri, 08 Feb 2019 20:16:22 GMT

The BLE beacon example broadcasts a beacon advertisement. The beacon packet is completely full when you advertise major and minor ID's. So you can't just add in battery level.

If you want battery and major and minor you have to add code to broadcast the battery service. The ble_app_bps and ble_app_hrs both implement the battery service.

Also, the ble_app_proximity broadcasts the battery service. Since it sounds like it is intended for proximity beacons that broadcast battery level. It could be a good place for you to start.

RE: To display uuid, major,minor values and the battery life using Ble_app_beacon example

Naralasetty Praneeth — Fri, 08 Feb 2019 08:16:59 GMT

Please explain it briefly

RE: To display uuid, major,minor values and the battery life using Ble_app_beacon example

Naralasetty Praneeth — Fri, 08 Feb 2019 07:41:24 GMT

i need to display uuid,major,minor values and the battery life for that what should i do

RE: To display uuid, major,minor values and the battery life using Ble_app_beacon example

AmbystomaLabs — Thu, 07 Feb 2019 18:14:29 GMT

Major and minor are only useful for proximity applications. Most people repurpose one or both of them for battery info and other info. Otherwise you have to add and broadcast the battery service. Since each one is 16 bits wide you can normally shove quite a few extra attributes into the available space.

RE: To display uuid, major,minor values and the battery life using Ble_app_beacon example

Vidar Berg — Thu, 07 Feb 2019 13:42:45 GMT

Hi,

You can view the beacon advertisement data in the nRF connect app (PC/android/ios). Battery level is not included.